rizoma MI BS145 03 Billet Aluminum Using 3d Precision Machining User Manual
- June 3, 2024
- rizoma
Table of Contents
rizoma MI BS145 03 Billet Aluminum Using 3d Precision Machining
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.
Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.
-
Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of
your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com). -
For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the
correct functioning of the product. -
After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly
suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking,
bent, deformed, cracked, chipped or worn, no matter how slight, immediately
have a RIZOMA dealer inspect the products before you ride again. In any case
never try
to repair or modify the Rizoma products or their components, always replace
with Rizoma original components. Rizoma products may not be compatible with
your motorcycle or with other aftermarket equipment installed before. For your
safety Rizoma suggests to always contact
your RIZOMA dealer.
O.E.M: original equipment manufacturer.
The Eccentrico mirror is made from billet aluminum using 3D precision machining. Modern lines have been used to update classic styling and make the overall design more Dynamic. The stem shape gives the design an organic touch. Its anti-dazzle glass and adjustment system guarantee versatility and comfort. Complies with European homologation standards. Consult the website www.rizoma.com, click on the BS145 page the section “MEDIA”, to download the homologation document in PDF format.
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components.
Warning
- Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.
- TO CLEAN YOUR MIRROR DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR MIRROR, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER. Consult the website or contact the authorized dealer to choose the universal adapter.
INSTALL MIRROR ON HANDLEBAR
- Clean and degrease the mirror shaft hole, the bushing and the external part of handlebar.
WARNING: TO USE THE PROPER BUSHING CHECK THE EXTERNAL DIAMETER OF HANDLEBAR.
INSTALL MIRROR WITH UNIVERSAL ADAPTER
ATTENTION: CLEAN AND DEGREASE THE MIRROR SHAFT HOLE, THE EXTERNAL PART OF THE THREAD BUSHING AND THE UNIVERSAL ADAPTER.
ATTENTION: LUBRICATE WITH GREASE THE THREADS AND THE UNDER HEAD SCREW.
INSTALL RH MIRROR
WARNING: FOR THE CORRECT MOUNTING OF RIGHT SIDE CHECK THAT BETWEEN THE HANDLEBAR CAP AND THE THROTTLE GRIP THERE IS MINIMUM 1mm.
ADJUSTMENT MIRROR
- Find the correct position of the mirror and tighten the screw.
INSTALL PLASTIC CAP
WARNING: USE THE FURNISHED CAPS TO CLOSE THE HOLE FIXING OF THE OEM MIRROR.
RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury. The action depicted is performed by professionals under strictly controlled riding conditions.
Avvertenze Warnings
Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy. All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding styles, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® Srl declines any responsibility for a different use of its products.