bewello BW2040 Musical Owl with Lighting Effect User Manual
- June 3, 2024
- bewello
Table of Contents
Musical Owl with Lighting Effect
USER MANUAL
Product Nr.
BW2040
Musical Owl with Lighting Effect
It is well known that children are afraid to sleep in the dark. It is reassuring to have a little mood light and pleasant soft music in their room. The removable multifunctional unit in the owl helps you relax and gives a sense of security to the little ones. The laser-cut starry sky on the front of the device is illuminated by a colorful RGB LED. You can choose from a variety of light and sound programs, whether it’s soft music or white noise. „White noise” is a method that has long been used to soothe crying babies and children. Due to the battery operation, it does not need to be connected to the mains power supply, so it can be used wirelessly.
- Adjustable volume
- Alternating colors or a specific color
- 5 optional white noise
- Cheerful, soft, plush owl
Size: | 25 x 20x 12 cm |
---|---|
Material: | Owl: 100% polyester Filling: polypropylene Control unit: plastic |
Power source: | 3 x 1.5 V AAA (not included) |
Lighting modes: | Changing, Red, red-green-yellow, green, green-blue, blue, |
blue-red, white
Sound effects:| music + 5 types of white noise
Washable:| yes, only the cover (owl part)
Can be bleached:| no
Chemical cleaning:| yes (the cover only)
Recommended age:| 0 – 3 year
USER MANUAL
Please remove the entire packaging from the product before use! The LED
speaker module in the middle can be removed to replace the batteries, and the
plush part becomes washable. To remove the middle part, gently tighten, press
the plush at the edge of the module until the rubber edge of the material
comes off the plastic rim. Proceed in a circle to completely remove the rubber
rim from the plastic. You will need a small Phillips screwdriver to insert the
battery. Remove the screw and the battery cover, then insert the batteries
with the correct polarity! Replace the battery cover and secure it with the
accessory screw! Try the device if the device turns on properly, put it back
in the plush and make sure it is firmly in place before using it.
Do not place the appliance next to the baby during operation, it is
recommended to operate it from a distance of 3-4 meters by selecting the
appropriate volume and light effect. If the baby does not respond well to the
device: becomes restless, cries, stop using the device! The appliance does not
have a timer, you have to switch it on and off! You can switch between the
individual sound and light functions by pressing the control buttons againThe
sound and light functions can be set independently so that they can be used
separately or at the same timeIf you only want to use the light function,
press the “Light” button, if you only want the sound effect, press the power
button, and then use the “Light” button to turn off the light effect.
PARTS:
-
Plush
-
Battery module
-
LEDs
-
Speaker
CONTROL BUTTONS -
White noise
-
Volume
-
Light effect
-
On-off switch
CLEANING INSTRUCTIONS
Plush part: The plush part can be washed by hand or machine. Do not bleach, do
not dry clean. Do no iron.
Control module: Clean with a dry microfiber cloth. Do not use any chemicals or
cleaning agents!