bewello BW2000 Garment Steamer User Manual

bewello BW2000 Garment Steamer

Garment Steamer

Thank you for purchasing our product, we hope the long-term use will be satisfactory.

Product description

A new generation of clothing care has arrived! Few people love housework and even fewer people like ironing. It is no longer necessary to bother with the ironing board, it is enough to place the garment on a hanger and simply steam it. With the power of steam, the creases and wrinkles of clothes can be removed in a matter of seconds, the advantage is that steaming between washes can extend the life of garments. It can be ideal for garments sensitive to ironing, but it is also suitable for refreshing, cleaning and disinfecting curtains, tablecloths, sheets, and sofas. Thanks to the brush head, steam penetrates deep into the material, thus allowing deep cleaning of any fabric.

Safety instructions

In addition to the information in the following operating instructions, the general safety and accident prevention regulations of the legislators must also be observed. Please use the device only in appropriate protective clothing and avoid accident-prone situations. During use, the physical integrity of oneself and one’s environment is the most important! The warning and information boards on the device contain important information on safe operation!

• Danger: Hazard warning of serious injury or death.
• Warning: Indication of potentially hazardous situations that, if not avoided, could result in death or serious injury.
• Caution: Warnings for situations that might cause minor injuries.
• Attention: Hazard warning of property damage.

DANGER!

General advices:

Danger of suffocation! Please keep the packaging of the appliance out of the reach of children as it may lead to suffocation. The appliance may only be used by adults, the storage location must be chosen in such a way that children cannot accidentally access it. Children should be supervised to ensure that they do not play with the appliance.

Risk of electric shock:

Never operate the appliance with wet hands touching the device, including the power plug and cable, with wet hands are strictly prohibited! The device must only be connected to AC power with the correct voltage. Do not point the appliance directly at electrical appliances, as steam may get inside and damage them. There is a risk of short circuit and electric shock in this situation. Do not fill the appliance with water while it is connected to the mains! Do not use the appliance near a bathtub, shower, swimming pool, or sink containing water. Do not clean the appliance in places, eg over sockets, and switches where water may enter!
Operation: Make sure of environmental regulations before use! Do not use the device in an explosive atmosphere! When used in special places (e.g. filling stations, baths, etc.) the local safety regulations must be observed!

WARNING!

General advice: The device may only be used for its intended purpose! When using, pay attention to, the physical safety and safety of those around you (especially children). The device may only be used by people who have read, understood, and are able to operate the device according to these operating instructions! People with reduced mental, physical or sensory capabilities should not use the device! Children should not use the appliance! After using the appliance, make sure that the hot appliance can cool down in a well-ventilated place meanwhile not causing personal injury to anyone! Inform those around you about the temperature status of the device!

Risk of electric shock

Only connect the appliance to a mains socket that is safe to operate or has been installed by a specialist in accordance with IEC 60364-1. In wet rooms (eg bathrooms), only connect to a socket with an earth-leakage circuit breaker! Before each use, make sure that the appliance and the main cable and connectors are intact! Only undamaged devices may be operated! If you experience any damage, do not use the appliance, contact a specialist garage! During use, pay attention to the integrity of the power cord, and avoid edges or objects that can damage the surface of the cord. Avoid the use of extension cords or splitters, as they are a source of danger during operation. Use only splash-proof extension cords with a crosssection of at least 3 x 1 mm2. Always unplug the appliance when not in use. Maintenance work must only be carried out with the mains unplugged.

Operation: Danger of scalding! Never touch the steam jet or direct it at other people or animals! Due to the strong emission of steam, there is a risk of scalding during the entire duration of use! Allow the steam boiler to cool slightly before refilling! To avoid burns, always allow the appliance to cool down before you touch it! Do not use the device to clean pressure vessels as there is a risk of explosion. The device may only be operated when fully assembled with only the factory accessories! If any part is damaged, it must be replaced before use. Allow the appliance to cool down completely in a well- ventilated place before storing it.

CAUTION!

General advice: Do not use the device if you have previously dropped or struck it and it is visibly damaged! Do not use the appliance if you experience seal breaks or steam leaks is strictly forbidden to use, modify or disable safety devices as intended!

Operation: Always operate and store the device as described! Always check the integrity of the appliance, cable, plug, and accessories! Do not use the device in case of damage! The appliance must only be operated if there is water in the steam boiler, otherwise, the appliance may overheat and be damaged. When using and maintaining the device, make sure that you keep your balance and stable position!

ATTENTION!

Operation: Do not fill the tank with detergent! Use the appliance only at freezing temperatures above 0 ° C to avoid condensation and electric shock. Never leave the appliance unattended when it is connected to the mains! Do not use the appliance for heating or evaporating! Protect the device from moisture and water! Do not store the device outdoors in great temperature fluctuation. Activities involving damage to the device: Do not add solvents, solvent-based cleaners, acid, benzene, thinner, acetone, other liquids to the device! Operation with the wrong amount of water can cause clogging of the nozzles. Use the appliance only with clean water and distilled water! Do not use rainwater, additives, and other condensed water. If possible, use 50% mixed distilled water and tap water!

USER MANUAL

General Instructions

Please read the following user guide and safety warnings carefully before using the device! Proceed as described here during use! Please keep this manual for future reference! If you lend the device to someone else, please send this documentation. The appliance cleans with the power of steam, no chemical cleaner is required for its operation! The device is designed for residential use! The device may only be used with factory accessories! Do not disassemble or modify the device! In the event of a malfunction, contact a specialist who can repair your device with only original parts! Please follow the safety instructions!

Symbols on the device

• Risk of burns, the surface of the device may become hot during use!
• Risk of scalding by steam!
• Read the instructions for use and proceed as described!

First use

Remove all factory packaging from the device. After the first fill up, connect the appliance to the mains, and the appliance will start warming up. Check how to fill it up properly in the intended point. During the first commissioning, minimal smoke may escape from the steam nozzle, initially, the steam exit from the appliance may not be continuous, and will be intermittent. After a short run-in (approx. 1 minute), the steam output must be strong and continuous.

Use

• Filling with water: Use the funnel and measuring cup provided with the appliance. Pay attention to the markings on the measuring cup. Do not add more liquid to the device than necessary (max 200 ml)!

1. Push the safety latch on each side of the water tank to pull the tank forward out of the bottom of the appliance.
2. The water tank can be completely removed from the device, thus simplifying the filling of the tank with water.
3. Fill the tank with a maximum of 200 ml of water using the measuring cup provided.
4. Put the container back in the appliance. The correct connection is also indicated by clicking on the safety latches.

Note: It is recommended to use commercially available distilled water to prevent limescale formation. Using hot water can shorten the healing time.(Do not use hot water)

Start up

The appliance may only be used vertically, please also take care not to tilt the appliance too much during use, as this may lead to insufficient steam generation.

1. Place the appliance on a solid base. (eg table, counter…)
2. Please make sure that the mains voltage is compatible with the device before connecting. Only with dry hands should you hold the device! Connect the appliance to the mains!
3. Switch on the appliance with the toggle switch on the top.
4. The appliance starts to heat up, which takes about 25 seconds.
5. You can then start the steaming operation.
6. To start steaming, pull the steaming trigger towards you if the slide on the trigger is pushed down by steaming continuously without having to press the trigger.

Switching off

1. To stop steaming, release the trigger and push up the slide switch.
2. When not in use, switch off the appliance with the button on the top.
3. Unplug the appliance. Attention! Never pull it by the cable, but by the plug.

Tank Cleaning

This is necessary if you use non-distilled water during steaming. Using tap water can cause limescale in the system, which can have a detrimental effect on the steam boiler’s performance in the long run.

1. Allow the appliance to cool down completely after switching it off.
2. Do not connect the device to the mains.
3. Disconnect the accessories attached to the device.
4. Fill the tank with distilled water and vinegar (1:1), wait about 5-10 minutes and rinse in a circular motion until the deposited limescale dissolves. Do not use any chemicals for cleaning!
5. Empty the tank completely.

Check with your local water company for the hardness of the tap water available to you. The cleaning processes must be concentrated in direct proportion to the hardness of the water. If the water is hard in your area, please clean the appliance frequently so that you can use it much longer without any problems.

Features

General clothes cleaning: Use the appliance without the brush head for general laundry. The device helps to eliminate wrinkles and wrinkles with the help of proper steam pressure. Thick clothes, sofas, upholstery: Use the accessory brush head, which brushes help to deliver steam deep into the material, thus also allowing deep cleaning of upholstery materials.

Cleaning accessories

• Clean them without chemicals, with water and a soft cloth. We recommend using a microfiber cloth.

Technical Specifications

• Power source: AC 220 – 240 V
• Max. power: 1100 W
• Steam amount: 12 – 18 g / minute
• Steam temperature: 100 °C
• Heating duration: only 25 sec
• Max. steaming duration (with one charge): 12 minutes
• Tank capacity: 200 ml
• Protection: IPX4
• Heat-proof housing: Yes
• Overheating protection: Yes
• Anti scaling function: No
• Cable type: 3g0.75 mm²
• Cable length: 170 cm
• Cable color: White
• Device color: White / Turquoise
• Size: 100 x 160 x 275 cm
• Accessories: brush head, measuring cup

Troubleshooting

To avoid electric shock and burns, please do not perform troubleshooting while the unit is connected to AC power and has cooled down completely!

Disconnect the accessory head from the nozzle and clean the nozzle insert.

2.               Set up the appliance for a short time and use it.

3.               Unplug the device again and replace the accessory nozzle.Be careful not to come into contact with hot /

warm surfaces.

No steam.| There is no water in the tank.| Fill the steam boiler with water using the measuring cup provided.
The steaming button cannot be pressed.| The appliance is equipped with a safety lock to prevent accidental steaming.| Press and hold the button on the side until you also press the steaming button. Steaming starts, and you can release the side safety button.
Water leaking.| The housing has been significantly tilted or the water level has been exceeded.| 1.               Do not tilt the device more than 30 ° in any direction.

2.               Fill the tank with only the maximum amount of water indicated on the measuring

cup.

References

• nozzle.be

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>