bewello BW2038 Fountain with Cool White LED User Manual
- June 5, 2024
- bewello
Table of Contents
bewello BW2038 Fountain with Cool White LED User Manual
Warnings
General advice:
Danger of suffocation! Please keep the packaging of the appliance out of the reach of children as it may lead to suffocation. The appliance may only be used by adults, the storage location must be chosen in such a way that children cannot accidentally access it. Children should be supervised to ensure that they do not play with the appliance.
The device may only be used for its intended purpose! When using, pay attention to the physical safety and safety of those around you (especially children). The device may only be used by people who have read, understood this operating manual and are able to operate the appliance! People with reduced mental, physical or sensory capabilities must not use the device! Children should not use the appliance!
Do not use the appliance if you have previously dropped or smashed it and it is visibly damaged!
The light source that provides the fountains mood light cannot be replaced!
Danger of slipping :
The area around the product may be wet due to the operation of the fountain! Use caution.
Risk of electric shock
Never operate the appliance with wet hands! It is strictly forbidden to touch the device, especially the mains plug and the cable with wet hands! The device may only be connected to AC power with the correct voltage. Only connect the appliance to a mains socket that is safe to operate or has been installed by a specialist in accordance with IEC 60364-1. The device may only be operated under supervision. Do not use the appliance near a bathtub, shower, swimming pool or sink containing water! When placing the power cord, make sure that any water that splashes out cannot accidentally run ont he cable to the power source.
Before each use, make sure that the appliance and the mains cable and connectors are intact. Only use undamaged devices! If you see any damage, do not use the appliance, contact a specialist garage! During use, pay attention to the integrity of the mains cable, avoid edges or objects that can damage the surface of the cable. Avoid the use of extension cords or splitters, as they are a source of danger during operation. Use only splash-proof extension cables with a cross-section of at least 3 x 1 mm2. Always unplug the appliance when not in use. Maintenance work must only be carried out with the mains plug removed. It is forbidden to reach into the tank or catchment area of the working fountain with your hands or with any objects!
Installing
- Place the fountain on a horizontal, stable, dry surface. Make sure that the appliance is stable, placed in a location where it can’t be accidentally dropped, caught in the mains cable and possibly pulled out. Keep in mind that the mass of the fountain filled with water will be greater than the dry mass of the fountain.
- Check that the transparent pressure pipe is properly connected to the pump, you can control the water flow rate using the slide switch (+1-) on the side of the pump. Place the pump with the suction cups facing down into the bubble tank.
- Fill the bubbling tank with at least 6 dl of room temperature or colder water until the pump is submerged.
- The mains plug must be easily accessible so that the appliance can be easily disconnected from the power supply if necessary.The mains plug of the appliance must only be connected to a socket with a compatible voltage level. When choosing an outlet, make sure that any leaking water cannot accidentally run through the cable to the power source. The mains cable must only be connected if the pump is in the correct amount of water, otherwise the pump may be damaged! Connect the mains adapter to the appropriate socket, the pump will start circulating the water and the mood light will turn on.
- If the water does not start, disconnect the mains plug from the socket, check that the pump is in the correct position and that there is enough water in the tank, then reconnect the mains plug for — 15 seconds. If necessary, repeat the operation 2x 3x to bleed the system.
- Due to the natural evaporation of water during prolonged use, the amount of water must be replenished!
If you experience a malfunction, it may be necessary to clean the device! (see„cleaning”)
Operation
Do not fill the tank with cleaning agents or chemicals! Do not drip essential oil into the water, as this may damage the pump! Never leave the appliance unattended when it is connected to the mains! The device may only be used indoors, protected from environmental factors. (IPX8)
Always operate and store the device as described! Always check the integrity of the device, cable, plug and accessories. In the event of damage, do not use the device! Use the fountain only on a horizontal, stable surface! Be careful not to move or rotate the appliance if there is water in the appliance, as this may lead to electrical malfunctions. Empty the container before moving the appliance! If the unit is accidentally moved or overturned, disconnect the power supply (— 230V) immediately. Do not expose the device to radiant heat (sunshine, radiator, etc.) If necessary, seek professional assistance from a service center. Do not reach into the slots of the guard during operation with any object, you risk causing an accident! Do not cover the device with any material! Do not disassemble the device! It is forbidden to change the parameters of the device!
The manufacturer and distributor shall not be liable for any damage resulting from improper use.
Specification
- Energy source: 220 – 240 V AC, 50/60 Hz
- Light source: cool white
- Performance: 3W
- Max current: 0.05 A
- Pump water flow: 0.5 – 1 L / hour
- Cable length: 145 cm
- Cable type: H03WH2-F 2 x 0.75 mm2
- Wire color: Black
- Water temperature: 10-35°C
- Amount of water required for operation: 0,6 – 1,26 L
- Full size: 220 x 150 x 300 mm
- Weight: Empty: 1600 g, Filled with water: 2300 g
Cleaning
Unplug the machine from the electrical outlet, and then drain the water from the machine’s tank. We recommend that you prepare for the operation with a towel or cloth to soak up any spilled water. Use a chemical-free, slightly damp cloth or sponge to clean the device. Clean the pump housing of the appliance and the water flow path. You can restart the device.
Disposal
Do not dispose of a defective, unrepairable appliance in the household waste container, as it may contain components that are hazardous to the environment or human health! For proper, environmentally sound disposal of your old appliance, please contact your local waste collection point, where you can return the appliance free of charge. If you have any questions, please contact your nearest waste disposal company.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>