TESLA TSL-CAM-5S Smart Camera 360 User Manual
- June 7, 2024
- Tesla
Table of Contents
TESLA SMART
CAMERA 360
USER MANUAL
WHAT‘S IN THE BOX
Please consult this checklist for all parts.
- Smart Camera 360
- Power adapter
- USB cable
- Bracket
- Screws
- Pin
- User manual
| Power | DC 5V ±10% |
|---|---|
| Status light | Red light solids on the camera or network are abnormal |
Blinking red light: awaiting WiFi connection (faster blinking)
Blue light solids on camera running correctly
Blinking blue light: currently connecting (faster blinking)
Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (Max.128G)
Reset| Press and hold for 5 seconds to reset the camera (if you have modified
settings, they will return to factory defaults)
INSTALL
-
Use the included mounting bracket to fix the camera to a clean surface.
-
Or, put the camera on a flat surface.
CONNECT
Download
Tesla Smart is available for both iOS and Android OS. Search the name ‚Tesla
Smart‘ in App Store or Android Market, or scan the QR-Code to download the
App.
SET UP ROUTER
The router supports the 2.4GHz WiFi (doesn‘t support the 5GHz), and is
connected to the WiFi network. Please set the parameters of the
router before connecting the WiFi network, and record the SSID and password of
your WiFi. Please keep network available
REGISTRATION PROCESS
Step 1 Open the Tesla Smart App, click „Register“, read the „Privacy
Policy“ and click „Agree“ .
Step 2 Input a legal and valid Mobile number or Email address and click
„Continue“. Input Verification Code, then log in to the app.
QR CODE CONFIGURATION
- Open the Tesla Smart App, click „Create a family“, and you can customize the Family name and related settings.
- Continue to click „Security & Sensor“ >> „Smart Camera“, and then choose“ Add Device“ or „+“, ready to add camera.
- In „Add Device“ this interface, continue to click „next step“, and then you should input your WiFi‘s passwords. Note:
- Camera only supports a 2.4GHz WiFi network. 2) The number of bits in the SSID and passwords of the router should not exceed 24 digits.
-
In this interface, you should scan the QR code in your phone with the camera, when the camera comes out „dong dong dong“. And
you can complete the configuration in about 30s. -
When connecting, you should make sure your router, mobile, and camera are as close as possible. When the camera is added successfully, click „ „ you could also DIY the camera‘s name.
SETTINGS
In the „Smart Camera“ interface, click „ „, you can set the camera common
functions.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device
and add it again.
Q: Why is it still in the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn‘t the device identify the SD card?
A: It is recommended to plug in an SD card after a power cut. Confirm whether
the SD card is normally available and the format is FAT32.
And the TF card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened.
FUNCTIONS
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with 360
degrees of vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send you to push
notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage or Cloud
storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
TECHNICAL SPECIFICATION
| Product name | Tesla Smart Camera 360 |
|---|---|
| Resolution | 1920 x 1080 |
| Power supply | DC5V, 1A |
| Sensor | 1/3‘‘ 2MPx, CMOS |
| IR Distance | Up To 10 m |
| Lens | 3.6mm, F2.0 |
| Dimensions | 87,4 x 110 mm |
| Storage | MicroSD Card, Cloud |
| App | Tesla Smart for Android and iOS |
| Connectivity | Wi-Fi 2,4 GHz IEEE 802.11b/g/n |
| Model | Speed 5S |
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for a separate collection. The product
must be disposed of in accordance with the regulations for
disposal of electrical and electronic equipment (Directive 2012/19/ EU on
waste electrical and electronic equipment). Disposal together with regular
municipal waste is prohibited. Dispose of all electrical and electronic
products in accordance with all local and European regulations at the
designated collection points which hold the appropriate authorization and
certification in line with the local and legislative regulations. Correct
disposal and recycling help to minimize impacts on the environment and human
health. Further information regarding disposal can be obtained from the
vendor, authorized service center, or local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Witty Trade s.r.o. declares that the radio equipment type Speed 5S is
in compliance with EU directives. The full text of the EU
declaration of conformity is available at the following internet address:
teslasmart.com/declaration
Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
Frequency band: 2.400 – 2.4835 GHz
Max. radio-frequency power (EIRP): < 20 dBm
TESLA SMART
CAMERA 360
Manufacturer
Tesla Global Limited
108 Lok Shan Road, Tokwawan,
Kowloon
Hong Kong, 85200
www.teslasmart.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>