anko 43001149 Kids Bluetooth Headphones Instruction Manual
- June 7, 2024
- Anko
Table of Contents
anko 43001149 Kids Bluetooth Headphones
Includes
- Bluetooth® headphones
- charging cable
- audio cable
This product shall be supplied by a power source not exceeding PS1 only.
-
This Bluetooth headphone shall be charged by the supplied charging unit only.
CAUTION -
The batteries in this product are not replaceable.
-
Use, storage or transportation the battery should not be subjected to extremely low temperatures, Of low air pressure at high altitude.
-
If the battery is exposed to extremely high temperatures it could result In an explosion or the leaking of flammable liquid or gas.
-
Please take care when disposing of the unit; disposal in a fire, oven, mechanically crushing or cutting machine could cause explosion.
How to use these headphones
Function Operation
Play: Press button
Pause: Press button
Previous Track: Press button
Next Track: Press button
Answer Call: Press button
End Call: Press button
Reject Call: Press and hold button for approx. 2 seconds
Redial Last Call: Press button twice
Activate Phone Assistant: Press button twice
Volume Up: Press and hold button
Volume Down: Press and hold button
Power ON: Press and hold button for approx. 1 second until blue LED is on
Power OFF: Press and hold button for approx. 3 second until red LED
flashes
Pairing the headset with Bluetooth devices
- Once the headphone is powered on, you will hear a voice prompt “power on”, the headphone will then pair to the last paired device.
- If not previously paired, search on your electronic device’s Bluetooth menu and select the pairing name KM43001149 or KM43001156 or KM43001163.
- Once connected you will hear a voice prompt ·connected”.
- To disconnect Bluetooth function on the connected device, the headphone will go to pairing mode again with red and blue LED flashing and is available to be connected with a different device.
Aux Mode
To switch to Aux mode, insert the Aux Cable into the headphone and the 3.5m Jack end into your mobile device or computer. Bluetooth mode will automatically switch off.
Battery Charging
- Please use the provided USB cable to charge the battery.
- Insert the micro USB cable end into the headphone charging port.
- Insert USB charging cable into an appropriate 5V 1A USB port.
- The LED will turn red when charging and turn blue when the headphone is fully charged.
- It takes max 3 hours to fully charge the battery.
Specifications
Model no | 43001149, 43001156, 43001163 |
---|---|
Version | V5.0 |
Support profiles | A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6 |
Working distance | 10 Meters |
Music time | Approx. 10 hours |
Talk time | Approx. 10 hours |
Standby time (powered) | Approx. 30 hours |
Charging voltage | 5V DC. |
Battery capacity | 300mAh |
Charge time | Approx. 3 hours |
Pairing window time | 5 minutes |