JLAB GHBJPLAYRBLKBLU4 JBuddies Play Gaming Headphones Instruction Manual

: June 7, 2024
: JLab

Table of Contents

BLUETOOTH PAIRING
CHARGING
BUTTON FUNCTIONS
VOICE PROMPTS
CONSOLE + MOBILE GAMING
PC / MAC SETUP IF CONNECTED TO BLUETOOTH
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JLAB GHBJPLAYRBLKBLU4 JBuddies Play Gaming Headphones Instruction Manual

BLUETOOTH PAIRING

Turn on the Bluetooth in your device settings.
Release.
Light will f lash red and blue to indicate pairing mode.
Select “JLab Play” in your device settings to connect.

CHARGING

Connect to computer or USB 5V (or less) output device.

CHARGING CABLE

BUTTON FUNCTIONS

VOLUME UP:
Press once
TRACK FORWARD:
Press and hold 2+ seconds
VOLUME DOWN:
Press once
TRACK BACKWARD:
Press and hold 2+ seconds
POWER ON / OFF:
Press and hold 2+ seconds
PLAY / PAUSE / ANSWER / HANG UP CALLS:
Press once
REJECT INCOMING CALL:
Press and hold 1+ second
ACTIVATE SIRI (iOS) OR “OK GOOGLE” (ANDROID):
Press twice
BLUETOOTH PAIRING:
See Bluetooth Pairing page
SWITCH GAMING / MUSIC EQ:
Press and hold 1+ second both buttons simultaneously
GAMING: 1 Beep
MUSIC: 2 Beeps

GAMING (One Beep)

Increased mid-high frequency response for clear vocals and spacial awareness

MUSIC(Two Beeps

Amplified vocals and bass for enhanced music listening

MICROPHONE ON:
Press OUT (blue ring)
MICROPHONE OFF (MUTE):
Press IN (no blue ring)

VOICE PROMPTS

“HELLO”
Power is ON.
“READY TO PAIR”
JLab Play headphones are ready to connect to your Bluetooth device.
YOU’RE CONNECTED”
JLab Play headphones are connected to your Bluetooth device and ready for use.
“GOODBYE”
Power turning OFF

NOTES

When using the AUX INPUT, the microphone and game volume will also be determined by your console settings.
Adjust accordingly.
The boom microphone and mute function works in both Bluetooth and AUX INPUT modes.
The button functions on the headphone ear cup will only work in Bluetooth mode.

CONSOLE + MOBILE GAMING

Plug in the Micro USB into the Micro USB input.

AUX INPUT CABLE

HEADPHONE VOLUME WHEEL

(Adjust your console/ device volume accordingly

Plug in the AUX input your controller or device.

PC / MAC SETUP IF CONNECTED TO BLUETOOTH

SETUP with PC (Windows 7, 8, or 10):

. From the Start Menu, select the Control Panel.
Select Hardware and Sound category.
Select the Sound category.
The Playback tab should show JLab Play Gaming Headphones connected as the Default Device.
Click the next tab that says Recording.
Right click the JLab Play Gaming Headphones
icon and select “Set as Default Device”.
Click OK box to save changes.

SETUP with MAC (macOS 10.1 and higher):

Open System Preferences and select the
Sound icon.
Select the Input tab and select “JLab Play”.
Select Output tab and select “JLab Play”.
From this screen, set the Output volume to
desired level.
Closing out of the window will save settings.

CAUTIONS

Avoid getting moisture or liquids on the headphone cups.
Avoid extreme heat, cold, and humidity.
Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
If you experience regular discomfort while using this product, discontinue use and consult your physician.
We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.

Shop products | Product alerts | Burn-in your headphones

JLab Audio + Burn-in Tool

We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.

YOUR WARRANTY

All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.