PET GEAR PRO PAWTY FOR CATS Instruction Manual

June 7, 2024
PET GEAR

PET GEAR LOGO

For The ON-THE-GO Pet™
INSTRUCTION MANUAL
PRO PAWTY FOR CATS™
PG4625SCC/PG4625ESC

PET GEAR PRO PAWTY FOR CATS -

To see our full line of products, visit us online at:www.petgearinc.com
CUSTOMER SERVICE HELP DESK
customerservice@petgearinc.com
Toll-Free877-752-9123 – Eastern Standard Time 8am-3pm, Monday through Friday

PARTS LIST

Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.

PET GEAR PRO PAWTY FOR CATS -PARTS LIST

CRATE SET UP

Step 1. Open both sides of the wireframe.PET GEAR PRO PAWTY FOR CATS
-Step 1

Step 2. Insert wire into connector near the center of front and back sides.PET GEAR PRO PAWTY FOR CATS -Step 2 Step 3. Velcro inner panel to support wire and velcro all tabs along sides to secure the cover to the frame.PET GEAR PRO PAWTY FOR CATS -Step 3

Step 4. Place Pro Pawty on litter tray mat.PET GEAR PRO PAWTY FOR
CATS -Step 4 Step 5. Unzip door to acess litter box **for easy cleaning.PET GEAR PRO PAWTY FOR CATS -Step 5 PET GEAR PRO PAWTY FOR CATS PG4625SCC/PG4625ESC**

TIPS FOR GETTING CATS TO USE PRO PAWTY
Once the Pro Pawty is assembled you may want to leave the front door unzipped for a day or two, just to make sure your cat knows where their litter box is. After the cat uses the litter box inside the Pro Pawty a few times, they should be comfortable using it and the zippered door can be closed.
AVOIDING SUFFOCATION HAZARDS
Never use plastic shipping bags or another plastic film as pad covers not sold and intended for that purpose. They can cause suffocation. This product is not intended for commercial use.
SETTING UP THE CRATE
THIS PRODUCT REQUIRES ADULT ASSEMBLY.
Be sure the crate is completely set up before use.
Always follow the instructions in the product instructions to set up the crate.
Before each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges.
Do not use the crate if any parts are missing or broken.
Call PET GEAR at 1-877-752-9123 for replacement parts. Use only PET GEAR replacement parts.
Visit our website www.petgearinc.com to view or download the product instructions.
Do not substitute parts.
WARNING!
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, destructive, immature, or untrained animals. Do not Use neat and open or exposed names.
Failure to follow these warnings and the instructions could result in serious injury or death.

REPLACEMENT PARTS

Use onlyPET GEAR replacement parts.
Please have your model number ready before calling.
http://www.petgearinc.com/main.asp?sel=2
You can also request parts:

PET GEAR LOGO 192 Sheldon Avenue
West Rutland, VT 05777
877-752-9123
www.petgearinc.com
PET GEAR PRO PAWTY FOR CATS
PG4625SCC/PG4625ESC

Documents / Resources

| PET GEAR PRO PAWTY FOR CATS [pdf] Instruction Manual
PRO PAWTY FOR CATS, PG4625SCC, PG4625ESC
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals