ANKER A3116 Soundcore Motion+ Wireless HiFi Bluetooth Speaker User Manual
- June 7, 2024
- Anker
Table of Contents
User Manual
Soundcore Motion+
Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Soundcore Motion+ can be immersed in water up to 1m for up to 30 minutes.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Do not use any corrosive cleaner/oil to clean.
What’s Included
At a Glance
- Bass Indicator
Bass indicator color| White
---|--- - Bass Button
- Volume – Button
- Multi-function Button
- Volume + Button
- Bluetooth Button
- Bluetooth Indicator
Bluetooth indicator color| Blue / White
---|--- - Power Button / Power Indicator
Power indicator color| Red / White
---|--- - USB Type C Port
- 3.5mm Audio Input Port
Using Your Soundcore Motion+
- Turn On / Off
| ON | Press once |
|---|---|
| OFF | Press and hold for 2 seconds |
Soundcore Motion+ is equipped with High-Resolution Audio. This specialty gives
the speaker a better sound quality by referring to digital processes that
allow playback of music using higher sampling rates.
Note : Soundcore Motion+ supports Qualcomm® aptX™.
a. Bluetooth mode
Slowly Flashing Blue(Fade in and out)| Bluetooth Pairing Mode
Note: starts to connect to the previously connected mobile device when the
speaker is turned on.
---|---
Solid Blue| Connected to a device
| Enter True Wireless Stereo Group Mode / Disconnect True Wireless Stereo
---|---
| Slow Flashing White| True Wireless Stereo Group Mode
| Solid White（Secondary speaker）| Connected to True Wireless Stereo
| Solid Blue（Primary speaker)
With True Wireless Stereo technology, you can pair your Soundcore Motion+ with another Soundcore Motion+ to explore the best sound effects with left and right sound channels separated on both speakers.
Music
| Play / Pause
---|---
| Play Next Song
| Play Previous Song
| Press to turn Bass on
| Press once to activate bass
Note: Press again to switch back to Normal Equalizer.
| Activate Siri / Other Voice Control Software
| Volume Up / Down
Mobile phone
| Answer Call / End Call
---|---
| Reject Call / Switch between a call on hold and an active call
| End current call and answer incoming call / End current call and switch to
call on hold
| Switch audio source between Speaker and Phone
| Solid Blue| On a Call
---|---|---
| Flashing Blue| Incoming Call
When turned on, Soundcore Motion+ will automatically connect to the last
connected device if available. If not, press the Bluetooth button to activate
pairing mode.
To pair a different device, press the Bluetooth button to re-enter pairing
mode. Then repeat the pairing steps.
Having connection problems? Remove Soundcore Motion+ from your device’s
Bluetooth history and ensure it’s less than 3 feet away. Then try pairing
again. To get the best sound quality, make sure there is a clear line of sight
between the connected device and your speaker.
b. AUX-In mode
Plugging in an audio cable will automatically switch to AUX mode. When using AUX mode, control audio playback via the connected device.
Charging your Soundcore Motion+
| Slow Flashing Red| Low Battery
---|---|---
| Solid Red| Charging
Off| | Fully Charged
Use the included USB cable to charge your Soundcore Motion+ and make sure it
is fully charged before its first use.
USB type C cable only supports charge in, it does not support charge out.
Disconnect your speaker from the charger when fully charged. Do not charge
your speaker for extended periods.
When not in use, store your speaker in a cool place.
Specifications
Specifications are subject to change without notice.
Input: 5 V 2 A
Audio output: 30 W
Battery capacity : max.6700mAh
Charging time: Approximately 4 hours(When power is off and the adapter must
be at least 5V/2A)
Playtime (varies by volume level and music content): 12 hours
Size: 257 x 79 x 81 mm / 10.1 x 3.1 x 3.2 inch
Weight (without packaging): 1050 g / 37 oz
Bluetooth version: V 5.0
Bluetooth range: 30m/99ft
Sound Frequency Range: 50Hz~40kHz
Soundcore App
Customer Service
| 18-month limited warranty
---|---
| Lifetime technical support
| service@soundcore.com
| +1 (800) 988 7973 (US) Mon-Fri 9:00 – 17:00 (PT)
+44 (0) 1604 936200 (UK) Mon-Fri 6:00 – 11:00 (GMT)
Qualcomm® aptX™ Technical specifications
Compression ratio: 4:1
Word Depth: Support 16bit and 24bit
Decoding delay: Sample Rate 48kHZ<2ms
Dynamic range: 16bit>92dB, 24bit>120dB
Data rates: 352kbps
Decode mode: Stereo
Qualcomm aptX is a product of Qualcomm Technologies International, Ltd.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries, used with permission. aptX is a trademark of
Qualcomm Technologies International, Ltd., registered in the United States
and other countries, used with permission.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>