ANKER Soundcore Boost A3145 User Manual
- June 7, 2024
- Anker
Table of Contents
Soundcore Boost
USER MANUAL
Charging your Soundcore Boost
- To preserve battery lifespan, fully charge at least once every 45 days.
- To prevent damage, use the provided USB-C cable.
Powering On/Off
Press the power button to power on or off.
Bluetooth Pairing
| Rapidly flashing blue| Bluetooth pairing
---|---|---
| Steady blue| Bluetooth connected
• Press and hold the power button for more than 4 seconds to disconnect the
currently connected device and re-enter the pairing mode.
• When powered on, your Soundcore speaker will automatically connect to the
last successfully connected device if available.
• The Soundcore speaker will automatically power off 10 minutes after
Bluetooth is disconnected.
Button Controls
Play / Pause| | Press
Next track| | Press twice
Previous track| | Press thrice
Volume up / down| | Press
BassUp| | Press
Answer / End a call| | Press
Put the current call on hold and answer a new incoming call| | Press
Transfer a call between the speaker and mobile phone| | Press and hold for 2
seconds
Reject a call| | Press and hold for 2 seconds
Activate Siri or other voice
assistant softwar
| | Press and hold for 2 seconds
TWS (True Wireless Stereo) Mode
Two identical Soundcore speakers (A3145) can pair with each other for stereo
sound.
- On both Soundcore speakers, press the TWS button to enter TWS pairing mode.
- In TWS mode, connect either speaker with your Bluetooth-enabled device. The two speakers can play music on the left channel and right channel.
| Rapidly flashing white| TWS pairing
---|---|---
| Steady white| TWS connected
• To break the connection, tap your NFC device again onto the NFC detection area of your Soundcore speaker.
Charging USB Devices
This Soundcore speaker can charge your USB devices with its built-in battery.
APP
Download the Soundcore App for an enhanced product experience.
- Check product information
- Customize EQ settings
- Show battery status
- Adjust the volume
- Set Auto Power Off
- Firmware update
Specifications
Specifications are subject to change without notice.
| Input (USB Type-C) | 5 V 2 A |
|---|---|
| Output (USB Type-A) | 5 V 1 A |
| Audio output | 10 W × 2 |
| Driver size | 1.75” x 2 |
| Frequency response | 20 Hz – 20 kHz |
| Impedance | 4Ω |
| Battery capacity | 5200mAh |
| Charging time | 4-6hours |
| Playtime (varies by volume level and content) | 12hours |
| Waterproof level | IXP7 |
| Bluetooth version | V5.0 |
| Bluetooth range | 20m/66ft |