ZYXEL 4G LTE Indoor Router LTE3203-M347 User Guide
- June 7, 2024
- ZYXEL
Table of Contents
ZYXEL 4G LTE Indoor Router LTE3203-M347
Hardware Installation
Network Connection
Configuration
Turning On/Off WiFi
Package Contents
-
Check that the LTE3202-M437 is turned off. Insert your SIM card (Micro-SIM card) to the SIM card slot for LTE network access as shown, and put the cover back in place after the installation.
Warning : If you are using a Nano-SIM card, insert it correctly and securely into a SIM card adapter to avoid possible damage to your device. -
Use the included power adapter to connect the power socket to a power outlet. Press the POWER button to turn on the LTE3202-M437.
-
Find the WiFi name (SSID) and enter the WiFi password.
-
To initiate WPS to set up a secure WiFi connection between the LTE3202-M437 and a wireless client, press the WPS button for one second. Press the WPS button on the client within 2 minutes.
-
Use an Ethernet cable to connect a computer to one yellow LAN port of the LTE3202-M437.
-
connect your computer or laptop to the LTE3202-M437 using an Ethernet cable. Open the web browser from your computer and enter the default management IP address (192.168.1.1). Enter the user name admin and password 1234, then click Login. The home screen appears. Click the Wizard icon to change the default WiFi settings in Step 2 Set UpWiFi.
LEDs
Troubleshooting
Power and Hardware Connections
- Make sure the SIM card is correctly installed in the LTE3202-M437.
- Make sure the power jack is connected correctly.
LTE3202-M437 Access and Login
- Make sure you are using the correct IP address.
- The default IP address is 192.168.1.1.
- If you changed the IP address and have forgotten it, you have to reset the device to its factory defaults.
- Make sure your Internet browser does not block pop-up windows and has JavaScript enabled.
- Make sure you have entered the user name and password correctly. the default password is 1234. If this does not work, you have to reset the device to its factory defaults.
Internet Access
- Make sure you insert an LTE SIM card into the card slot before turning on the LTE3202-M437.
- Log into the web configurator (Default username: ad min, password: 1234).
- Follow the Wizard prompts to complete the setup.
- Make sure your SIM card’s account is valid and has an active data plan.
- If you are using a pre-paid SIM card, insert the SIM card into another LTE device to check if the SIM card still works. If the SIM card works without any problems on another LTE device, contact the vendor. If the SIM card doesn’t work, contact your service provider.
WiFi Connections
- Make sure the wireless LAN is enabled on the LTE3202-M437.
- Make sure the wireless adapter (installed on your computer) is working properly.
2G/3G/L TE Connections
- Make sure your SIM card’s account is valid and has an active data plan.
- Install the 2G/3G/LTE external antennas to strengthen the cellular signal.
See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.
EU Importer
Zyxel Communications NS
Gladsaxevej 378, 2. th. 2860 S0borg, Denmark
https://www.zyxel.com/dk/da/
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
https://www.zyxel.com/us/en/
Copyright© 2020Zyxel Communications Corp. All Rights Reserved.