DORMAN 264-973 Engine Valve Cover Installation Guide
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 264-973 Engine Valve Cover
INSTALLATION
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully. This product is only designed to function properly on specific vehicle applications. Please verify that the vehicle requirements match the product specifications and application notes for this part.
American Motors 1984, Jeep 1990–83
Install the valve cover and mounting bolts at locations 8, 9, 10, and 11. Install by hand only. DO NOT TIGHTEN AT THIS TIME.
Continue to install the bolts in the sequence specified by the manufacturer
and tighten them to the specified torque.
Do not overtighten them as it could damage the valve cover
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
Dorman Products, Inc.
- Corporate Office and Customer Service : 1-800-523-2492
©2020 No reproduction in whole or in part without prior written approval.