ZYXEL Ethernet Switch with optional Cloud Management User Guide
- June 7, 2024
- ZYXEL
Table of Contents
ZYXEL Ethernet Switch with optional Cloud Management
Hardware Installation
To help protect against lightning and interference functions, secure a green/yellow ground cable to the Switch.
Option A Cloud Management
- Go to the Zyxel Nebula Control Center (NCC), and click Login to sign up for a myZyxel account or enter your existing account information.
- Use the setup wizard to create an organization and a site.
- Register the Switch by entering its MAC address and serial number.
Note: The Switch can be managed by the NCC automatically after it has been registered to a site.
Option B Standalone Configuration
Option 1: Configure with ZON Utility for DHCP Environment
- Connect the Switch and your computer to the same network that has a DHCP server.
- Use the ZON utility to discover the Switch. Select the Switch and click the Web GUI icon to access its web configurator.
Option 2: Configure with Switch Default Static IP
- Connect your computer to the Switch and make sure its IP address is in the same subnet.
- Launch your web browser to access and configure the Switch.
Option 3: Configure with Console Cable (Managed Switch Only)
Terminal emulator configuration:
VT100 terminal emulator
9600 bps or 115200 bps
No parity, 8 data bits, 1 stop bit
No flow control
Mounting Options (by each model)
Rack Mounting
Wall Mounting
Desktop Installation
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>