AU-XT ANC User Guide
- June 7, 2024
- AU
Table of Contents
QUICK START GUIDE
Ausounds Intelligence, LLC.
15300 Ventura Blvd., Suite 214
Sherman Oaks, California 91403, USA
www.ausounds.com
Designed by Ausounds in California | Made in China
CHARGE HEADPHONES FOR 1 HOUR BEFORE FIRST USE
PAIRING
1. Press and hold the power button for 5 seconds (a tone will sound) to initiate pairing mode.
Blue LED indicator will light for 1.5 seconds then alternate flashing red and blue.
2. Enable Bluetooth® on your device and enter
Bluetooth pairing mode.
3. Select AU-XT ANC.
Not pairing with your device?
Try restarting your device; then repeat pairing process.
AUDIO CONTROLS
ANC ON/OFF
Move the ANC switch to turn ANC on or off. When the headphone is off, you can turn on the ANC mode on.
Play/Pause
Tap the Power button to play or pause your music
Skipping tracks
Press and hold “+” button for 1 sec for next song. Press and hold “-” button for 1 sec for previous track
Adjust volume
Short press “+” button to increase volume. Short press “-” button to decrease volume
CALL CONTROLS
Answer call
Short press the Power button
End call
Short press the Power button
Decline call
Press and hold the power button for 2 seconds
Voice assistants
Press and hold the power button for 2 seconds
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>