Au Group Electronics CBL-GW1-OBD 7 Wire Cable with OBD II Male Housing User Manual
- June 12, 2024
- Au Group Electronics
Table of Contents
Au Group Electronics CBL-GW1-OBD 7 Wire Cable with OBD II Male Housing User Manual
The cable (part #: CBL-GW1-OBD) equipped with an OBD-II male housing and a DB9 female connector dedicated for Au GW1 devices.
The OBD-II male housing can be connected to vehicles equipped with OBD-II wire-to-wire receptacle housing.
Power, Ground, CAN_H, CAN_L are connected from / to the vehicle via this OBD- II male housing.
The DB9 female connector, which is designed for connecting with Au Gateway 1(GW1) devices. It will supply power, ground, CAN_H, CAN_L connection to Au GW1 devices.
Compatible Devices:
CBL-GW1-OBD is compatible to the following Au OBD2 to pluse Gateway and the Combo GW1:
Table 2
Nominal cable length: 2 feet
Pin out and wire diagram of CBL-GW1-OBD:
Website: www.AuElectronics.com
Support: Support@AuElectronics.com
Pin # and Signal Definition
The relative pin-number, color-coding and signal definition of each wire is listed in Table 1.
Table 1
Website: www.AuElectronics.selfip.com
Support: AuGroups@hotmail.com