ZYXEL Dual-Radio PoE Access Point NWA110AX User Guide
- June 7, 2024
- ZYXEL
Table of Contents
NWA110AX
802.11ax (WiFi 6) Dual-Radio
PoE Access Point
Quick Start Guide
Hardware Installation
Connect the UPLINK port to a router with Internet access. If you are not
using PoE, connect the NWA110AX power socket to an appropriate power source.
Option A Cloud Management
Option 1: Use MAC address and serial number to add a device to the NCC
Follow the steps below to manage the NWA110AX through the Zyxel cloud-based
network management system.
Note: Make sure the connected router has Internet access.
- Go to the Zyxel Nebula Control Center (NCC) website (https://nebula.zyxel.com). Click Get Started to sign up for my Zyxel account and log in.
|
---|--- - Create an organization and a site (network) in the NCC.
- Enter the NWA110AX’s LAN MAC address and serial number (S/N) (see the label on the device) in the NCC configuration screen.
Note: The NWA110AX will go into cloud management mode automatically and
restart after it is registered to a site. See the NCC
User’s Guide for more information about configuring the NWA110AX through the
NCC.
Option 2: Use the Zyxel Nebula Mobile app to add a device to the NCC
|
Where to find QR code:
Web Configurator or The label on the device
---|---
Download and open the Zyxel Nebula Mobile app. Log in with your Zyxel
account.
Create an organization and site or select an existing site. Scan the
NWA110AX’s QR code to add it to the site. (You can find the QR code in its web
configurator or on a label on the device or its box.)
Note: The NWA110AX will go into cloud management mode automatically and
restart after it is registered to a site.
Option B Standalone Management
1-a WiFi connection
| http://1.1.1.1 (First-time configuration only)
User Name: admin Login Password: 1234 (default)
---|---
1-a
From a WiFi-enabled computer, search for the NWA110AX’s default WiFi network
name ( Zyxel-XXXX , where XXXX is the last four characters of the MAC
address) and connect to it.
Open your web browser and enter “http://1.1.1.1” for initial configuration.
Enter the default user name (admin) and password (1234). Click Login.
Note: If the NWA110AX cannot connect to the Internet, use the DHCP-
assigned IP address of the NWA110AX to access its web configurator. Check the
connected router or DHCP server for the IP address of the NWA110AX.
1-b Wired connection
| 
http://192.168.1.2
User Name: admin
Login Password: 1234 (default)
---|---
1-b
Use an Ethernet cable to connect your computer to the UPLINK port of the
WAX510D through a PoE injector or PoE switch.
Use its DHCP-assigned IP or default static IP address “http://192.168.1.2”
to access the web configurator. Make sure your computer IP address is in the
same subnet as the WAX510D’s.
| 
---|---
2 The wizard appears automatically. Use the wizard to set up your
NWA110AX.
Note: It takes 1 to 2 minutes to apply your wizard changes. The power LED
will blink red and green alternatively. The power and WiFi LEDs then turn
steady green when the system is ready. Check the Dashboard screen and note
down the NWA110AX’s IP address in case you need to access it’s web configurator
again.
Note: The 1.1.1.1 is for initial setup only. It is not usable after the
NWA110AX is configured.
3 Use the NWA110AX’s new wireless settings (SSID and key) to re-connect
to the NWA110AX’s WiFi network for Internet access if you change them in the
wizard.
Wall / Ceiling Mounting
| 
---|---
1-a
Wall mounting: Drill two holes for the screw anchors (A), 62.4 mm apart.
Insert the screw anchors into the wall.
1-b
Ceiling mounting: Drill two holes for the screw anchors (A), 62.4 mm or
70.1 mm apart. Insert the screw anchors into the ceiling.
| 
---|---
2 Install two mounting screws through the holes on the bracket ( B )
into the plugs/anchors to secure the bracket to the wall/ceiling. Make sure
the screws are snugly and securely fastened to the wall/ceiling.
3 After the bracket is attached to the wall/ceiling, slide the NWA110AX
onto the bracket until it clicks into the place.
T-bar Ceiling Mounting
| 
---|---
Grounding
| 
---|---
Support Information
North America
+ 1 800 255 4101
__support@zyxel.com
EU
https://support.zyxel.eu
See the User’s Guide at www.zyxel.com for more information, including
customer support and safety warnings.
EU Importer
Zyxel Communications A/S
Gladsaxevej 378, 2. th. 2860 Søborg, Denmark
https://www.zyxel.com/dk/da/
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
https://www.zyxel.com/us/en/
©Copyright © 2020 Zyxel Communications Corp.
All Rights Reserved.
References
- 1.1.1.1 — The free app that makes your Internet faster.
- Internet.se Svenska AB - Vi Etablerar Företag på Nätet | Webbtjänster för företag
- Zyxel Nebula
- Zyxel Nebula
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>