DAN DRYER 67020 Hand Dryer Installation Guide
- June 3, 2024
- DAN DRYER
Table of Contents
DAN DRYER 67020 Hand Dryer Installation Guide
Introduction:
This guide shows how to properply install a DAN DRYER HEPA filter 67020/67021
LOKI
-
Locate the mounting holes on the foot of the dryer. Remove existing filter holder, if any, before the new unit can be installed.
-
Place the filter unit on the holes over the air inlet.
-
Fit and fully tighten the security screws onboth sides.
-
Installation/replacement of the filter is now complete.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>