LINDY 43333 10m USB 3.2 Gen 1 and DP 1.4 Type C Hybrid Cable User Manual
- June 3, 2024
- LINDY
Table of Contents
10m USB 3.2 Gen 1 & DP 1.4 Type C
Hybrid Cable
User Manual
No. 43333
lindy.com
© LINDY Group – FIRST EDITION (March 2022)
Introduction
Thank you for purchasing the 10m USB 3.2 Gen 1 & DP 1.4 Hybrid Cable. This
product has been designed to provide trouble free, reliable operation. It
benefits from both a LINDY 2 year warranty and free lifetime technical
support. To ensure correct use, please read this manual carefully and retain
it for future reference.
This fully featured 10m USB 3.2 Gen 1 & DP 1.4 Type C Hybrid Cable allows a
USB Type C device or display to be connected 10m away from the computer, while
transferring data with up to 5Gbps, video in resolutions up to 4K 30Hz and USB
Power Delivery for charging.
Package Contents
- 10m USB 3.2 Gen 1 & DP 1.4 Type C Hybrid Cable
- This manual
Features
- USB 3.2 / 3.1 Gen 1 specification with data transfer rates up to 5Gbps
- Supports DisplayPort Alternate Mode
- Supports DP 1.4 (2 lanes)
- Supports video resolutions up to 4K 3840×2160 30Hz
- Interfaces: USB Type C male to USB Type C male
- Supports Power Delivery up to 60W (20V 3A)
- Flexible cable (6.5mm diameter) with narrow bend radius for easier installation
- Higly resistant to EMI/RFI interference
- Compatible with USB Type C equipped computers
Installation
Connect the USB Type C connector marked “Source” to a free USB Type C port on your computer. Your computer will recognize the new hardware and install any required drivers automatically. Now connect the other USB Type C plug to your USB device or display.
Please note:
- USB devices which only support DP signals over 4 lanes might not be compatible.
- Displays must have set USB settings to USB 3.0 in order to receive video via Type C.
- Please ensure the connector labelled “Source” is connected to the source device. The cable will not work correctly in the opposite direction.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of
Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process. Each individual EU
member state, as well as the UK, has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA
requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modification not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Hersteller / Manufacturer (EU):.
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com , T: +49 (0)621 470050|
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk , T: +44 (0)1642 754000
---|---
Tested to comply with
FCC standards.
For home and office use.
No. 43333
1st Edition, March 2022
lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>