LANCOM GS-3126XP Fully Managed Access Switches User Guide
- June 3, 2024
- LANCOM
Table of Contents
LANCOM GS-3126XP Fully Managed Access Switches
Overview
-
Configuration interface (Console)
Connect the configuration interface via the included serial configuration cable to the serial interface of the device you want to use for configuring/monitoring the switch. -
TP Ethernet interfaces
Use Ethernet cables to connect interfaces 1 to 24 to your PC or a LAN switch. -
SFP+ interfaces
Insert suitable LANCOM SFP modules into the SFP+ interfaces 25 to 26. Choose cables that are compatible with the SFP modules and connect them as described in the module’s documentation. -
Power connector (device back side)
Supply power to the device via the power connector. Please use the IEC power cable supplied or a country-specific LANCOM Power Cord.
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide! Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
Please observe the following when setting up the device
- The mains plug of the device must be freely accessible.
- For devices to be operated on the desktop, please attach the adhesive rubber footpads
- Do not rest any objects on top of the device and do not stack multiple devices
- Keep all ventilation slots of the device clear of obstruction
- Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.
- Please note that support service for third-party accessories is excluded.
- Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>