LAMAX Blaze2 User Manual
- June 6, 2024
- LAMAX
Table of Contents
LAMAX Blaze2 User Manual
Controls
| On | Hold for 2 seconds |
|---|---|
| Off | Hold for 2 seconds |
| Pairing | Hold for 4 seconds |
| Play / Pause | Press |
| Next / Previous Track | Hold / hold |
| VOL + / VOL – | Press / press |
| Answer / End Call | Press |
| Reject Call | Hold for 3 seconds |
| Redial the last call | Press twice |
| Activate Mobile Assistant | Press three times |
Turning On
Press for 2 seconds to turn on the headphones. This is accompanied by an audible notification and the blue LED lights up.
Pairing
- To enter the pairing mode, hold the button for 4 seconds. This is indicated by the LED alternately flashing red and blue.
- On your device, turn Bluetooth on and locate and select LAMAX Blaze2 in the list of available Bluetooth devices. After successfully pairing, there is an audible notification.
If you have trouble pairing, remove your headphones from the list of paired devices in your smartphone. Turn off the headphones and then hold the button for 4 seconds. The headphones turn on and automatically go into pairing mode. Pair the headphones again as in Step 2 above.
Turning Off
Press and hold the for 2 seconds to turn off the headphones.
Charging
To charge, connect the micro USB cable to the headphones and the other end to the 5V USB charger. The LED lights up red when charging and will turn off when fully charged.
Parameters
- Wireless technology: Bluetooth 5.0
- Bluetooth range: up to 10 metres
- Supported codecs: SBC
- Battery capacity: 500 mAh
- Headphone charging time: 2–3 hours
- Playback time: up to 35 hours
- Weight: 145 g
Subject to printing errors.
The latest version of the user guide can be downloaded here:
https://www.lamax-electronics.com/downloads/lamaxblaze2/manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>