ViewSonic VBS100 myViewBoard Box for Touch Displays User Guide

: June 4, 2024
: Viewsonic

Table of Contents

ViewSonic VBS100 my ViewBoard Box for Touch Displays
CONTENTS
INSTALLATION
FCC Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ViewSonic VBS100 my ViewBoard Box for Touch Displays

INSTALLATION

GETTING STARTED

Declaration of RoHs2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Certain components of products as stated above are exempted under the Annex l of the RoHS2 Directives as noted below: Examples of exempted components are:

Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for special purposes not exceeding (per lamp)
Short length (S500 mm): maximum 3.5 mg per lamp.
Medium length (>500 mm and 1,500 mm): maximum 5 mg per lamp.
Long length (>1,500 mm): maximum 13 mg per lamp.
Lead in glass of cathode ray tubes.
Lead in glass of fluores cent tubes not exceeding 0.2% by weight.
Lead as an alloying element in aluminium containing up to 0.4% lead by weight.
Copper alloy containing up to 4% lead by weight.
Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.

INFORMATION

http://www.viewsonic.com/support/

myView Board Box Wiki
https://wiki.myviewboard.com/MyViewBoard_Box CE Conformity for European Countries

The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU.

Following information is only for EU-member states:

The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available. If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received; including interference that may cause undesired operation. Industry Canada ICES-003 Compliance: CAN ICES-003(B) / NMB-003(B)