anko Wireless Charger User Guide
- June 6, 2024
- Anko
Table of Contents
Keycode # 42961321
WIRELESS CHARGER SET
For Your Safety:
Cautions
In emergency cases, please unplug the electric socket:
*Emergency cases include
– Smoke from the unit
– Changed shape
– Liquid or material leakage
– Dropped & broken casing or parts.
- The charger is used for office equipment and information technology equipment.
- The max ambient temperature is 40 °C.
- For indoor use only.
- Do not drop the product or submit it to impact.
- Dropping the product or submitting it to impact can cause the product to malfunction.
- Do not place the product in an area exposed to heat, direct sunlight, dampness, moisture, rain, vibration, shock, dust or sand.
- Do not place the product near any kind of magnet or expose it to excessive vibration.
- Do not drop the main body, accessories or submit them to any impact, as this can cause the product to malfunction.
- When the plug is used as a disconnect device, the socket-outlet shall be installed near the equipment and shall be easily accessible.
Introduction:
Specification:
Wireless Charging Pad
Input: DC 5V/3A, 9V/2A, 12V/1.5A
Output (wireless): 10W (Max)
Car Adapter (Cigarette Lighter Adapter)
Input: DC 12-24V
Output (USB-C): DC 5V/3A, 9V/2A, 12V/1.5A
To achieve fast wireless charging, the charging device must also support fast
wireless charging function.
Compatible power adapter included.
This wireless charger is compatible with Qi-enabled devices. Able to charge
through cases up to 3mm thick.
LED indicator:
Blue (1s): power is on
Blue (constant): charging in processing
Red: charging process completed
Blue (flashing): protection mode initiated
Blue-Red (flashing): power input voltage is lower than 4.2V / higher than
13.5V
User guide:
- Assemble air vent clamp to the wireless charging pad
- Clamp it on the air vent
- Connect the USB-C plug to the USB-C port on the wireless charging pad
- Connect the USB-C plug to Car adapter
- Plug the Car adapter into the cigarette lighter socket
- Adjust the adjustable holder to the proper size
- Put your phone near the infrared sensor/press the touchable button to activate the auto-locking clamp
- Put down your phone & charge
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd Warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with accompanying
recommendations or instructions where provided. This warranty is in addition
to rights under the Australian Consumer Law.
Kmart will provide you with your choice of refund, repair or exchange (where
possible) for this product if it becomes defective within the warranty period.
Kmart will bear the reasonable expense of claiming the warranty. This warranty
will no longer apply where the defect is a result of alteration, accident,
misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively, via Customer Help at Kmart.com.au for
any be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave
Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reason fails to be of acceptable quality and
the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>