Tronsmart QCC5124 Apollo Bold True Wireless Earbuds User Manual

: June 6, 2024
: Tronsmart

Table of Contents

Product Overview
Speciﬁcations
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Apollo Bold
True Wireless Earbuds Tronsmart QCC5124 Apollo Bold True Wireless
Earbuds User Manual

Product Overview

Touch control
LED indicator for pairing
Mic
Type-C charging port
LED charging indicator
Charging contact
Package Content
1 x Apollo Bold earbuds with charging case
3 x Ear tip pairs (a pair are placed on the earbuds)
1 x Charging cable
1 x User manual
1 x Storage bag
1 x Warranty card
1 x Quick start guide
Charging
1. Fully charge the earbuds and the charging case before ﬁrst time use.
2. Use the included Type-C charging cable.

LED indicator

Earbuds

White light ﬂashes quickly	Power-on but not pairing with any device

White light ﬂashes slowly| Power on and pair with the device
Red and white light ﬂash quickly| Pairing mode
Red light ﬂashes quickly| The battery level is low and not paired with any device
Red light ﬂashes slowly| The battery level is low and pair with the Device
Red light ﬂashes rapidly twice| Charging and the battery level is lower than 10%
Red light ﬂashes slowly| Charging and the battery level is higher than 10%
Red light goes oﬀ| Charging ﬁnished

Charging case
Charging

Red light goes oﬀ	Charging ﬁnished
Red light ﬂashing	Charging

Not charging

White light ﬂashes quickly	The battery level is higher than 10%
Red light ﬂashes quickly	the battery level is lower than 10%

Power On/Oﬀ
The earbuds will automatically power on when taken out of the charging case and will power oﬀ when placed back into the charging case.

Bluetooth Pairing with your Device

Take out two earbuds from the case.
The red and white light ﬂash alternately.
Then select ‘Tronsmart Apollo Bold ‘ from your device’s Bluetooth list.
Tap the ‘Pair’ option when the ‘Bluetooth Pairing Request’ popup comes.
Paired with the device successfully.

Tronsmart QCC5124 Apollo Bold True Wireless Earbuds -
2

How to Reset if the Earbuds Malfunctions

Take two earbuds out of the case. (Make sure that the two earbuds are not connected.)
Tap the touchpad of left and right earbud ﬁve times respectively, then you can pair the left and right earbud. (The light of earbuds ﬂash red twice and white in sequence.)
The white light of left and right earbud ﬂash slowly.
The left and right earbuds are paired successfully.

Clear the Phone’s Pairing List

Take out two earbuds from the case and wait for Bluetooth pairing mode.
When the red and white light of earbuds ﬂash alternately, tap and hold the touchpad on earbuds for 5 seconds until the red light ﬂashes three times.
Put two earbuds back in the case after the light of the earbuds goes oﬀ.
The earphones can be re-connected to the phone by taping the ‘Tronsmart Apollo Bold ‘ that displays in your pairing list.

Touch Control

L/R|

ANC ON / OFFAmbient sound mode

Speciﬁcations

Model	Apollo Bold
Bluetooth version	5.0
Chip	Qualcomm® QCC5124
Audio codec	aptX, AAC, SBC
Bluetooth proﬁle	HFP/HSP/AVRCP/A2DP
Connection distance	Up to 15 meters / 50 feet
Speaker driver	Φ10mm
Impedance	32Ω±15%
Audio frequency range	20-20K Hz

Care and Maintenance

If this product is not used for a long period of time, it’s recommended to recharge it at least once a month to extend its life and maintain the
normal use performance.
Keep the product in a dry location.
Do not dispose of this product in ﬁre as batteries may explode or leak.
To clean the product, use a lightly dampened cloth in water to clean the exterior in case it gets dirty.
Do not disassemble this product. It contains no user-serviceable parts.

Warranty Information

Your ‘Tronsmart Apollo Bold True Wireless Earbuds’, is warranted to the original owner for 1 year from the date of purchase against defects in material and workmanship under normal use and service. Tronsmart is not responsible for the accidental use of this product and its liability will not exceed the purchase price of the product. If you have any problems while using the product, please do not hesitate to contact our customer
the support team at support@tronsmart.com.

FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit diﬀerent from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

SHENZHEN GEEKBUY E-COMMERCE CO., LTD.
19th Floor, Galaxy World Tower B, #1 YaBao Rd.,
LongGang District, Shenzhen, China
Email: support@tronsmart.com
800-270-1082 (USA & Canada)
+86-755-23603740 (Global)