Tronsmart Halo 100 Portable Party Speaker User Manual
- June 3, 2024
- Tronsmart
Table of Contents
Tronsmart Halo 100 Portable Party Speaker
Button Configuration
HowtoUse
Bluetooth Connection
Click Tronsmart Halo 100 to Connect.
Dual Audio Modes
- Search & click “Tronsmart Halo 100” to connect with device A.
- Disconnect “Tronsmart Halo 100” from the device A(Note that do not clear the pairing record on the device).
- Tronsmart Halo 100 will re-enter pairing mode.
- Search & click “Tronsmart Halo 100” to connect with the device B.
- Click Tronsmart Halo 100″ on device A to connect
How to Enter/Exit Stereo Pairing
- Turn on two speakers and make sure they haven’t connected with any device.
- Press ‘Stereo Pairing button’ once on either speaker(Host Speaker) to enter stereo pairing mode. The stereo pairing indicator of host speaker will flash white.
- If paired successfully, the stereo pairing indicator of both speakers will stay white.
- Search & click Tronsmart Halo 100′ to connect. The power indicator of host speaker will stay blue while vice one will off with stereo pairing indicator of both speakers stay white.
- Press ‘Stereo Pairing button’ once on either speaker to exit stereo pairing mode.
Thank you for purchasing the Tronsmart Halo 100 Portable Party Speaker. Please
read the user manual before use and keep it handy for future reference. If you
have any additional questions or comments, please contact us by email at:
support@tronsmart.com
Package Contents
- 1x Tronsmart Halo 100 Portable Party Speaker
- 1x 3.5mm Audio Cable
- 1x Type-C Charging Cable
- 1 x Warranty Card
- 1x User Manual
- 1 x SoundPulse® Card
USB-A Power Bank Function
This speaker carries a USB charge-out function that will automatically detect
your device and begin to charge it when the charging cable is plugged into the
USB-A port under powering-on mode.
Aux-in Mode
Simply connect the speaker with your non-Bluetooth device via the 3.5 mm audio
jack cable.
Note: After plugging in an audio cable, the speaker will automatically switch to Aux-in mode.
TF Card Slot Mode
The speaker will play the music from your TF/Micro SD card when plugging the
card into the slot. Note that Micro SD/TF Card shal not exceed 128GB.
USB Flash Drive Mode
The speaker will play the music from your U-disk when plugging into the slot.
Auto Power Off
The speaker will power off automatically after 30 minutes if it does not pair
with any device through Bluetooth. It will also power off after 30 minutes if
doesn’t play any sound after pairing. When on low battery, the speaker will
power off automatically as well.
Specifications
Care & Maintenance
-
Do not use any form of detergents or cleaning material to clean the product as any type of chemical may make this device unusable.
-
Do not disassemble this product. It contains no user serviceable parts.
-
Do not drop or jump on it and treat it with care for the best performance.
-
Keep the product in a dry location. Dust, dirt & moisture from humidity can accumulate on the body of the product if kept
at an unfriendly place. -
Do not dispose this product in fire or batteries may explode or leak.
Warranty Information
Your Tronsmart Halo 100 Portable Party Speaker, is warranted to the original owner for 12 months from the date of purchase against defects in material and workmanship under normal use and service. Tronsmart is not responsible for the accidental use of this product and its liability will not exceed the purchase price of the product. If you have any problems while using the product, please do not hesitate to contact our customer support team at support@tronsmart.com.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may
not cause harmful interference, and 2) this device must accept any
interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference ina residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- ncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
RF Warning Statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
SHENZHEN GEEKBUY E-COMMERCE CO., LTD.
Warehouse 101H, No. 49 Wuhe Avenue, Wuhe Community,
Bantian Street, Longgang District, Shenzhen
Emait: support@tronsmart.com
phone: 800-270-1082 (USA& Canada)
tell: +86-755-23603740 (Global)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>