Tronsmart Apollo Q10 Hybrid Active Noise Cancelling Headset User Manual

June 4, 2024
Tronsmart

Tronsmart Apollo Q10 Hybrid Active Noise Cancelling Headset

tronsmart apollo q10 hybrid active noise cancelling
headset

Instructions

Thank you for purchasing the Tronsmart Apollo Q10 Headset. Please read the user manual before use and keep it handy for future reference. If you have any additional questions or comments, please contact us by email at: support@tronsmart.com

PACKAGE CONTENTS

  • 1 x Apollo Q10 Headset
  • 1 x Type-C charging cable
  • 1 x Warranty card
  • 1 x User manual
  • 1 x PU storage bag

BUTTON INSTRUCTION

  1. MFB button (Multi-function button)
  2. Power button
  3. Touch panel
  4. LED indicator
  5. Type-C charging port
  6. Earcupstronsmart apollo q10 hybrid active noise cancelling headset-1

SPECIFICATIONS

Model Apollo Q10
Bluetooth 5.0
Speaker unit 40mm
Audio codec SBC, AAC
Bluetooth transmission Up to 15m/49ft (open area)
Battery Capability 1200mAh
Power supply DC 5V/1.0A(Max), via Type-C port
Frequency range 20Hz – 20KHz
Playtime Up to 100 hours (on a 50% volume)
Talk time Up to 100 hours (on a 70% volume)
Sensitivity 100dB
Impedance 32 ohms
Charging time About 3 hours
Dimension(mm/inches) 196.6 X 174.8 X 80/ 7.74’’ X 6.88’’ X 3.15’’
Weight 220 g / 7.76 oz

Power On/Off

Press and hold the power button for 2 seconds to power on/off.
The indicator light status: The indicator light flashes blue. (Power on.) The indicator light goes off. (Power off)tronsmart apollo q10 hybrid active
noise cancelling headset-2

Bluetooth Pairing with your Device

  • Under the power off state: Press and hold the power button for 2 seconds. The indicator light will flash red and blue together with a sound prompt and enter the pairing mode.
  • Under the power on state: Double-click the power button to enter the pairing mode again; If a Bluetooth device is currently connected, it will disconnect the Bluetooth and enter the pairing mode again.

tronsmart apollo q10 hybrid active noise cancelling
headset-3

How to Reset if the headset is malfunctional?

  1. Power on the headset.
  2. Press and hold the MFB button and the power button for 5 seconds to disconnect Bluetooth and enter the pairing mode.
  3. When the indicator light flashes red and blue, the pairing setting will be cleared and reset is completed. tronsmart apollo q10 hybrid active noise cancelling headset-4
Touch & button control


R| Switch three modes| Press and hold for 3 seconds
R| Play/Pause| Tap twice
R| Next track| Swipe right/forward
R| Previous track| Swipe left/back
R| Volume +| Slide up
R| Volume –| Slide down


MFB| Activate voice assistant| Press to activate



R| Answer/End a phone call| Tap twice
R| Reject a phone call| Press and hold for 2 seconds
(New incoming call)
R| Answer a new phone call| Tap twice
R| End the previous call| Tap twice
R| Reject a new phone call| Press and hold for 2 seconds

How to activate the ANC mode without pairing with your phone?

  1. Power on but not pair with your phone. (The indicator light flash red and blue)
  2. Switch to the ANC mode and the indicator light will flash blue slowly after 5 minutes.
  3. Double tap the power button to wake up the headset to enter the Bluetooth pairing mode. (The indicator light flash red and blue)

Disconnect and reconnect

  1. After the headset is disconnected from the currently connected mobile phone, the Bluetooth will automatically reconnect within 10 minutes within the effective connection range;
  2. After the headset is disconnected from the currently connected mobile phone and returns to the effective connection range within 10-20 minutes, the Bluetooth needs to be manually reconnected;
  3. After the headset is disconnected from the currently connected mobile phone and returns to the effective connection range after 20 minutes, the headset will automatically shut down, and it needs to be restarted and reconnected.

LED indicator

  1. Pairing mode: The indicator flashes red and blue.
  2. Paired: The indicator light flashes blue slowly.
  3. Charging: The indicator light keeps on red.
  4. Charging finished: The indicator light keeps on blue.
  5. Bluetooth play status: The indicator light flashes blue slowly.
  6. Low battery level: The indicator light flashes red slowly.

Note: Switch the EQ effects or customize the button control on the APP.

Care & Maintenance

Do not use any form of detergents or cleaning material to clean the product as any type of chemical may make this device unusable. Do not disassemble this product. It contains no user serviceable parts. Do not drop or jump on it and treat it with care for the best performance. Keep the product in a dry location. Dust, dirt & moisture from humidity can accumulate on the body of the product if kept at an unfriendly place. Do not dispose this product in fire or batteries may explode or leak.

Warranty Information
Your ‘Tronsmart Apollo Q10 Headset’, is warranted to the original owner for 12 months from the date of purchase against defects in material and workmanship under normal use and service. Tronsmart is not responsible for the accidental use of this product and its liability will not exceed the purchase price of the product. If you have any problems while using the product, please do not hesitate to contact our customer support team at support@tronsmart.com.

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

SHENZHEN GEEKBUY E-COMMERCE CO., LTD.
19th Floor, Galaxy World Tower B, #1 YaBao Rd., LongGang District, Shenzhen, China
Email: support@tronsmart.com
800-270-1082 (USA & Canada)
+86-755-23603740 (Global)
www.tronsmart.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals