PRO TECH 1149038 +62 Volt Battery Powered Blower User Guide
- June 6, 2024
- PRO TECH
Table of Contents
PRO TECH 1149038 +62 Volt Battery Powered Blower User Guide
BATTERY-POWERED LEAF BLOWER
Assembly
-
Align the Blower Tube slots with the raised portion on the Blower Housing (Figure 1).
(Figure 1)
-
Slide the Blower Tube over the outlet on the Blower Housing until it is seated fi rmly against the fl ange base.
-
Rotate the Blower Tube 90° in the direction indicated to lock it in place (Figure 2). The raised tab on the top of the Housing will align with the
raised portion on the Tube.
-
Slide the Battery Pack into the battery cradle on the Blower Housing, aligning the ribs in the cradle with the slots in the battery until it is
latched into place (Figure 3).
-
Check that the Battery is securely locked into place.
**How to use
**
-
While fi rmly grasping the Handle, rotate the Power Switch button past the MIN/OFF position (forward) (Figure 4). If the Blower does not start, make
sure the Battery Pack is charged and locked fi rmly in the Blower Housing
-
Rotating the Power Switch button further forward will accelerate the Blower and pressing down on the Power Switch button will provide a short boost to the power.
-
To turn off, rotate the Power Switch backwards to the MIN position and past the detent/click.