national cycle N20412 VStream Low Beaded Windscreen Instruction Manual
- June 3, 2024
- national cycle
Table of Contents
national cycle N20412 VStream Low Beaded Windscreen
Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this windshield for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.
Description:| VStream® Replacement Windscreen and Side Deflectors| Model:|
2021-Later Harley-Davidson® Pan America
---|---|---|---
Part Number:| N20412/N20413/N20414/N20415| Installation Time:| 20 min.
Difficulty Level: Easy
PARTS LIST ITEM PART NO./DESCRIPTION /QUANTITY
A
|
VStream Windscreen; 2.0mm Polycarbonate
|
1
| from the rider’s point of view
---|---|---|---
B| 20-290936-000 Deflector; Left, 1.5mm Polycarbonate| 1|
C| 20-290937-000 Deflector; Right, 1.5mm Polycarbonate| 1|
BAG#1387
D | 49-490355- 000 | Spacer, Nylon, Black | 2 |
---|---|---|---|
E | 49-495587-000 | Spacer, Stainless Steel | 2 |
F | 51-516216-000 | Cap Screw, M5x16, Zinc, Black | 4 |
G | 75-766188-000 | Pad, Rubber Bumper Pair, 0.50″ x 0.14″ | 1 |
H | 77-770200-000 | Alcohol Prep Wipe | 1 |
TOOLS REQUIRED
• T-25 Torx Wrench
• 3mm Allen Wrench
PREPARATION
Put the motorcycle securely on its centerstand before beginning.
INSTALLATION
Figure 1
Use a T-25 Torx Wrench to remove the four screws securing the OEM windscreen
to the motorcycle, and then remove the wind-screen.
Figure 2
Use the same T-25 Torx Wrench to remove the four screws securing the OEM
deflectors to the motorcycle, and then remove the deflectors.
Figure 3
Now you are ready to install the new polycarbonate Deflectors (C, B). You will
need to include the stand-off Spacers (D, E).
Figure 4
Insert the supplied M5x16 Cap Screws (F) through the front of the new
Deflectors (C, B). On the back, add the thin Black Nylon Spacers (D) behind
the top two mount holes, and the thick Stainless Steel Spacers (E) behind the
bottom two mount holes.
Use a 3mm Allen Wrench to tighten the left and right M5x16 Cap Screws securing
the new Deflectors to the motorcycle.
NOTE: Do not over-torque Cap Screws.
Figure 5
Open the Alcohol Prep Wipe (H) and clean the area shown on the bike’s
windshield mount brackets.
Figure 6
Peel the adhesive Rubber Bumpers (G) and place one on each side on the bike’s
windshield mount brackets, just beneath the two vertical slits. Press and hold
them for 15-20 seconds to ensure complete adhesion.
Figure 7
Rubber Bumpers should appear as shown.
Figure 8
Place your new VStream WIndscreen on the motorcycle. It will insert into the
lower windscreen mount tray the same as the OEM windscreen.
Using the OEM screws, attach the VStream Windscreen to the motorcycle’s mount
points, and tighten with a T-25 Torx Wrench.
Figure 9
Your installation is now complete. Double-check all fasteners for tightness
before operating your motorcycle.
Ride safe and enjoy your new VStream® Windscreen and Deflectors!
CLEANING AND MAINTENANCE
To clean the screen, wash with a clean soft cloth and plenty of warm water and, if necessary, a non-abrasive soap such as dishwashing liquid. Flannel or soft chamois make good cleaning cloths. Paint, glue residue or grease removal: Moisten cotton wad with naphtha or turpentine followed by a wash as above.
National Cycle Shield Wash™ (N1401-01) makes a good daily cleaner and comes
with a handy travel-size bottle. Shield Wash is safe for all windshields and
helmet visors
Do not clean polycarbonate in hot sun or high temperatures. Do not clean the
screen with household glass cleaners. Do not allow brake fluid, alcohol, or
strong solvents to contact the screen.
RAIN REPELLENT
Do not use rain protective products made for automotive or household glass. We
recommend National Cycle’s RainZip® (N1410-01) to keep your wind-screen clear
in rainy weather.
Register Your Windshield Online at www.nationalcycle.com
National Cycle 3-Year Limited Warranty
National Cycle hereby warrants to the original registered owner of a National
Cycle polycarbonate windshield for a period of three years from the date of
purchase against breakage. This limited warranty is expressly limited to the
replacement of the polycarbonate windscreen. This limited warranty does not
include scratches, coating failure, cosmetic wear and tear, replacement of
hardware, or any consequential damages or expenses including labor cost of
installation, removal and/or replacement, inconvenience, inbound freight
expenses or damage to any other component of the motorcycle or any other
accessories. Certain chemicals, generally known as acidic hydrocarbons, are
known to cause polycarbonate damage and will not be covered under this limited
warranty. Please refer to the cleaning instructions supplied with all National
Cycle windshields.
Visit www.nationalcycle.com for further details, or call 708-343-0400 or e-mail info@nationalcycle.com.
WARNING: Never ride your motorcycle with loose accessory mounting
hardware. Check the hardware for tightness regularly.
Today’s motorcycles are built with enough frame rigidity to withstand the
moderate loads imposed on them by the foreseeable addition of an
accessory(ies). If an accessory(ies) adversely affects your motorcycle’s
stability, immediately remove the accessory(ies). Do not ride a motorcycle
that exhibits unsafe handling traits.
Have experienced service personnel correct any problem before riding with the accessory(ies) installed. For further questions concerning handling problems associated with an accessory(ies), contact your dealer, motorcycle manufacturer, or accessory manufacturer.
Sunlight reflected off the inside curvature of the windscreen can, at certain times of day, cause extreme heat buildup on the motorcycle’s instruments and possibly even melt them. Exercise care in parking to avoid this. Park your motorcycle facing the sun or place an opaque object over this area.
National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 USA ©2022 National Cycle, Inc.
www.nationalcycle.com 10-118627-000 RevB 07/22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>