national cycle N50007 VStream Sport Touring Windscreen Instruction Manual
- June 11, 2024
- national cycle
Table of Contents
national cycle N50007 VStream Sport Touring Windscreen Instruction Manual
Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this windscreen for a customer, please give them this manual. It contains information neededto properly maintain and use this product.
PACKAGE CONTENTS
| Item Description | Part No | Qty |
|---|---|---|
| Replacement Windscreen | N50007/08/09 | 1 |
TOOLS REQUIRED
5mm Allen Wrench or Driver
10mm Box Wrench or Socket
1 Phillips Screwdriver
NOTES
All OEM hardware will be reused.
PREPARATION
Place vehicle securely on its centerstand.
INSTALLATION
Step 01
With a #1 Phillips Screwdriver, remove the two 4×16 Self
Tapping Screws under the nose of the OEM windscreen.
Lift up the front of the windscreen cowl to separate the 20×25
Dual Lock™ Fasteners. Release the cowl by lifting the outer edge to free the
mounting tabs. Carefully remove the cowl by pulling it downwards towards the
front wheel.
Step 02
With a 5mm Allen Wrench, remove the two 5×14 Panhead
Screws and Thrust Washers securing the windscreen at the bottom left/right
from their captive Wellnuts.
Step 03
With a 10mm Wrench, remove the two 6×12 Bolts securing the windscreen at the
top left/right. Bolts have captive 9.5×18
Washers and Black Nylon Washers.
Retain all hardware for reassembly of new windscreen.
Quantum® is a registered trademark and exclusive product of National Cycle Inc.
Step 04
Place the new Windscreen into position and reinstall the two 6×12 10mm Bolts
and Black Nylon Washers securing the Windscreen at the top left/right.
Step 05
With a 5mm Allen Wrench, reinstall the two 5×14 Panhead Screws and Thrust
Washers securing windscreen at the bottom left/right, making sure the threads
capture the internal Wellnuts.
Step 06
Replace the Windscreen cowl by aligning the top tabs with the top slots and
the hidden tabs with their hidden slots. Push upwards as indicated to engage
the tabs in their slots.
Step 07
When the cowl is completely installed, make sure the 20×25
Dual Lock™ Fasteners under the front end are rejoined and then reinsert the
two 4×16 Self-Tapping Phillips Screws under the nose of the new Windscreen.
You’re all done.
Enjoy the ride with your new Windscreen!
CLEANING AND MAINTENANCE
To clean the screen, wash with a clean soft cloth and plenty of warm water and, if necessary, a non-abrasive soap such as dishwashing liquid. Flannel or soft chamois make good cleaning cloths. Paint, glue residue or grease removal: Moisten cotton wad with naphtha or turpentine followed by a wash as above.
National Cycle Shield Wash™ (N1401-01) makes a good daily cleaner and comes with a handy travel-size bottle. Shield Wash is safe for all windshields and helmet visors
Do not clean polycarbonate in hot sun or high temperatures. Do not clean the screen with household glass cleaners. Do not allow brake fluid, alcohol, or strong solvents to contact the screen.
RAIN REPELLENT
Do not use rain protective products made for glass. We recommend National
Cycle’s RainZip® (N1410-01) to keep your windscreen clear in rainy weather.
Register Your Windshield Online at: www.nationalcycle.com
National Cycle 3-Year Limited Warranty
National Cycle hereby warrants to the original registered owner of a National Cycle polycarbonate windshield for a period of three years from the date of purchase against breakage. This limited warranty is expressly limited to the replacement of the polycarbonate windscreen. This limited warranty does not include scratches, coating failure, cosmetic wear and tear, replacement of hardware, or any consequential damages or expenses including labor cost of installation, removal and/or replacement, inconvenience, inbound freight expenses or damage to any other component of the motorcycle or any other accessories. Certain chemicals, generally known as acidic hydrocarbons, are known to cause polycarbonate damage and will not be covered under this limited warranty. Please refer to the cleaning instructions supplied with all National Cycle windshields.
Visit: www.nationalcycle.com for further details, or call or write National Cycle
WARNING
Never ride your motorcycle with loose accessory mounting hardware. Check the hardware for tightness regularly.
Today’s motorcycles are built with enough frame rigidity to withstand the moderate loads imposed on them by the foreseeable addition of an accessory(ies). If an accessory(ies) adversely affects your motorcycle’s stability, immediately remove the accessory(ies). Do not ride a motorcycle that exhibits unsafe handling traits.
Have experienced service personnel correct any problem before riding with the accessory(ies) installed. For further questions concerning handling problems associated with anaccessory(ies), contact your dealer, motorcycle manufacturer, or accessory manufacturer.
Sunlight reflected off the inside curvature of the windscreen can, at certain times of day, cause extreme heat buildup on the motorcycles instruments and possibly even melt them. Exercise care in parking to avoid this. Park your motorcycle facing thesun or place an opaque object over this area.
National Cycle, Inc
708-343-0400 / Fax:
708-343-0625
PO Box 158 Maywood, IL
www.nationalcycle.com
60153-0158 USA
e-mail: info@nationalcycle.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>