national cycle CRF1100L VStream Sport Windscreen Honda Africa Twin Instruction Manual
- June 4, 2024
- national cycle
Table of Contents
VStream® Windscreen Patent No. 7,387,328
Quantum® Hardcoated Polycarbonate
VStream® Windscreen for Honda®
CRF1100L Africa Twin Standard
N20070 Dark Tint, Sport
N20071 Light Tint, Sport-Tour N20072 Clear, Touring
CRF1100L VStream Sport Windscreen Honda Africa Twin
Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this windshield for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.
Description:| VStream® Replacement Windscreen| Model:| 2020-Later Honda®
CRF1100L Standard
---|---|---|---
Part Number:| N20070/N20071/N20072| Installation Time:| 15 min. Difficulty
Level: Easy
PACKAGE CONTENTS
ITEM PART NO. | DESCRIPTION | CITY. |
---|---|---|
A BAG#1378 | VStream Windscreen | 1 |
B 51-516221-000 | Cap Screw, Flanged Buttonhead, M5x22. Black | 6 |
49-490124-000 | Flat Washer, M5, 5.3mm ID x 11mm OD, Black Nylon | 6 |
`D 49-490421-000 | Flat Washer, 5.5mm ID x12.0mm OD, Black EPDM Rubber | 6 |
E 42-472023-000 | I Rubber/Brass Wellnut, 5mm | 6 |
TOOLS REQUIRED
3mm Hex Wrench
5mm Hex Wrench
ATTENTION: Special notes and cautionary measures can prevent damage to the accessory or vehicle.
NOTE: Tips for facilitation of operation, control and adjustment, as well as maintenance work.
PREPARATION
Place the motorcycle securely on its side stand.
OEM WINDSCREEN REMOVAL
Figure 1
With a 5mm Hex Key, loosen – do not remove – all four Allen Screws holding the
OEM Windscreen to the mounting bracket.
OEM Screws, Washers, and Walnuts will remain in the vehicle’s Windscreen when
it is removed. They will not be reused.
|
---|---
OEM WINDSCREEN REMOVAL; CONT’D
Figure 2
Pull the Windscreen downwards until it bottoms out, then pull it off the
Windscreen’s mounting bracket.
HARDWARE INSTALLATION
Figure 3
Your VStream Windscreen has six mounting holes and is supplied with new
mounting hardware from Bag#1378. Make six assemblies of Flanged Buttonhead Cap
Screws (B), Black Nylon Flat Washers (C), and Black Rubber Flat Washers (D) as
diagrammed on Page 01. Insert each parts assembly through the Windscreen’s
mount holes and secure on the back with Rubber/Brass
Walnuts (E), but do not allow the Wellness to expand.
WINDSCREEN INSTALLATION
Illustration A
Insert the Windscreen with the Wellnuts going into the lower “squared” area of
the mounting bracket channels. Push Windscreen firmly into the bracket, then
push Windscreen upwards until it stops.
Figure 4
With a 3mm Hex Wrench, tighten all six Flanged Buttonhead Cap Screws (B)
securely. Do not over-tighten.
Ride safe and enjoy your new VStream Windscreen!
CLEANING AND MAINTENANCE
To clean the screen, wash with a clean soft cloth and plenty of warm water
and, if necessary, a non-abrasive soap such as dishwashing liquid. Flannel or
soft chamois make good cleaning clothes. Paint, glue residue or grease
removal: Moisten cotton wad with naphtha or turpentine followed by a wash as
above.
National Cycle Shield Wash™ (N1401-01) makes a good daily cleaner and comes
with a handy travel-size bottle. Shield Wash is safe for all windshields and
helmet visors
Do not clean polycarbonate in hot sun or high temperatures. Do not clean the
screen with household glass cleaners. Do not allow brake fluid, alcohol, or
strong solvents to contact the screen.
RAIN REPELLENT
Do not use rain-protective products made for glass. We recommend National
Cycle’s RainZip® (N1410-01) to keep your windscreen clear in rainy weather.
Register Your Windshield Online at
www.nationalcycle.com
National Cycle 3-Year Limited Warranty
National Cycle hereby warrants to the original registered owner of a National
Cycle polycarbonate windshield for a period of three years from the date of
purchase against breakage. This limited warranty is expressly limited to the
replacement of the polycarbonate windscreen. This limited warranty does not
include scratches, coating failure, cosmetic wear and tear, replacement of
hardware, or any consequential damages or expenses including labor cost of
installation, removal and/or replacement, inconvenience, inbound freight
expenses or damage to any other component of the motorcycle or any other
accessories.
Certain chemicals, generally known as acidic hydrocarbons, are known to cause
polycarbonate damage and will not be covered under this limited
warranty.
Please refer to the cleaning instructions supplied with all National Cycle
windshields. Visit www.nationalcycle.com for
further details, or
call 708-343-0400 or e-mail
info@nationalcycle.com.
WARNING
Never ride your motorcycle with loose accessory mounting hardware. Check the
hardware for tightness regularly.
Today’s motorcycles are built with enough frame rigidity to withstand the
moderate loads imposed on them by the foreseeable addition of an
accessory(ies). If an accessory(ies) adversely affects your motorcycle’s
stability, immediately remove the accessory(ies). Do not ride a motorcycle
that exhibits unsafe handling traits.
Have experienced service personnel corrected any problem before riding with
the accessory(ies) installed? For further questions concerning handling
problems associated with an accessory(ies), contact your dealer, motorcycle
manufacturer, or accessory manufacturer. Sunlight reflected off the inside
curvature of the windscreen can, at certain times of
day, cause extreme heat buildup on the motorcycle’s instruments and possibly
even melt them. Exercise care in parking to avoid this. Park your motorcycle
facing the sun or place an opaque object over this area.
National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 USA P:
708-343-0400 /
F: 708-343-0625 /
E: info@nationalcycle.com
www.nationalcycle.com
©2021 National Cycle, Inc.
Page 3 of 3
10-129508-000 03/22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>