JLAB 12497196 Jbuds Air Exes Earbuds User Manual

JBUDS AIR EXEC
EARBUDS
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.

YOUR WARRANTY
All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

CONTACT US
Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact

REGISTER TODAY

jlabaudio.com/register
Product updates
How-to tips FAQs & more

FIRST TIME SETUP

1. AUTO-CONNECTING EARBUDS
   A. Take earbuds out of the charging case and remove stickers.
   B. Press and hold both touch sensors 3+ seconds to turn ON.
   The left earbud turns solid white and the Right earbud blinks blue/white indicating ready to pair to your device.
   

2. CONNECTING TO BLUETOOTH
   Select “JLab JBuds Air Executive” in your device settings.
   Voice prompt “Bluetooth connected” followed by solid white lights will indicate you are connected.
   

ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected device.
Turn ON Bluetooth from the new device. Take earbuds out of the case.
Earbuds will automatically enter Bluetooth Pairing. Select “JLab JBuds Air Executive” in device settings to connect.

IN THE BOX

|
---|---

BUTTON FUNCTIONS

VOLUME DOWN: Single tap
SIRI (iOS) or “OK GOOGLE” (ANDROID): Double-tap
TRACK BACK: Press & hold 1+ sec
EQ CHANGE: Triple tap (JBuds Air Exec will cycle 3 EQ settings)
POWER ON: Press & hold 3+ sec| VOLUME UP: Single tap
PLAY / PAUSE: Double-tap
TRACK FORWARD: Press & hold 1+ sec
ANSWER: Single tap
HANGUP: Double-tap
REJECT INCOMING CALLS: Press & hold 1+ sec
BE AWARE ON / OFF: Triple tap
POWER ON: Press & hold 3+ sec
---|---

VOICE PROMPTS

“Hello”: Power ON
“Earbuds joined”: Earbuds paired to each other
“Ready to Pair”: JBuds Air Exec is ready to pair to Bluetooth device
“Bluetooth Connected”: Earbud is connected to the device
“Battery Full”: 100-80%
“Battery Medium”: 80-20%
“Low Battery”: Less than 20% When power decreases to 10%, “Low Battery” will play
“Goodbye”: Power OFF
TURN OFF EARBUDS WITHOUT CHARGING CASE:
Enter your Bluetooth device settings and disconnect the JBuds Air Executive. Earbuds will power OFF after 3 minutes.

EQUALIZER MODES

Triple tap left earbud for different EQ settings. Voice prompts will indicate EQ settings (JBuds Air Exec will cycle 3 EQ settings)

JLab SIGNATURE

| BALANCED|

BASS BOOST

JLab C3™ signature sound with amplified bass and vocals

| Even sound with no additional enhancements|

Amplified bass and sub-bass

CHARGING EARBUDS

1. Placing the earbuds in the charging case will power OFF earbuds and start charging.
   Blue lights indicate earbuds are charging and will turn off when fully charged.
   

2. When earbuds are taken out of the case, they will auto power ON and reconnect to your device.

CHARGING CASE

Connect the JBuds Air Executive to a computer or USB 5V 1A (or less) output device.

FITTING

Try the optional Cush Fins and all ear tips for the best fit and proper seal.

Place the earbud in the ear canal and slightly rotate to adjust for best fit.

TROUBLESHOOTING

NO AUDIO IN THE LEFT EARBUD OR EARBUDS DISCONNECT FROM EACH OTHER (MANUAL RESET)

1. Enter your Bluetooth device settings and forget the JBuds Air Executive. Fig A

2. Open the charging case door and leave both earbuds inside. Starting with ONE earbud, quickly tap the touch sensor 4x times. Light will blink blue
   4x times then turn solid blue. Leave the earbuds in the charging case. Fig C1

3. Repeat with another earbud. Quickly tap the touch sensor 4x times.
   Light will blink blue 4x times then t urn solid blue. Fig C2

4. Take both earbuds out of the charging case and keep them within 2 inches from each other. Wait for the Left earbud to turn solid white and the Right to blink blue/white.
   You are now ready to pair to your Bluetooth device.

| |
---|---|---

BLUETOOTH DEVICE DOES NOT CONNECT/RECONNECT

1. Enter your Bluetooth device settings and forget the JBuds Air Executive. Fig A
2. Turn OFF then ON Bluetooth. Fig B
3. Take the earbuds out of the case. Wait for Left to turn solid white and Right blinking blue/white.
4. Select “JLab JBuds Air Executive” in device settings to reconnect.

Instructional videos at: JLABAUDIO.COM/MANUALS

QUICK TIPS

• Fully dry off the earbuds before putting them in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant but the case is not.

• The Bluetooth connection is established from the right earbud.
  For the most stable connection, keep the device near the right-hand side or in the right pocket.

• If you prefer to wear only one earbud, you must wear the right earbud.

• Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on the chosen device to connect.

WARNING
Fully dry off the earbuds before placing them in the charging case.
If the earbuds are damp or wet, this will cause damage to the charging case. The warranty will be voided if the charging case shows damage by water/sweat.

CAUTIONS

• Avoid extreme heat, cold, and humidity.

• Avoid dropping or crushing the earbuds.

• Wax may build up in the earbud tips, lowering the sound quality.
  Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.

• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.

• If you experience regular discomfort while using this product, discontinue use and consult your physician.

• We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in a safe location when not in use.

Shop products
Product alerts
Burn-in your headphones
JLab Audio + Burn-in Tool
JLABAUDIO.COM

References

• JLab: True Wireless Headphones, Earbuds, Microphones, Personal Audio
• Contact Us – JLab
• JLab Product Manuals
• Register Your Product – JLab

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>