Klipxtreme KMA-610 Car Wireless Fast Front View Charging Mount User Guide
- June 6, 2024
- KlipXtreme
Table of Contents
Ridesmart
KMA-610
I. Introduction
Thank you for purchasing the KMA-610 car wireless fast charging mount from Klip Xtreme with Qi Inductive Charging Technology.
To enjoy all the features and benefits of this unit, please read the instructions included in this quick user guide. If you want to know more about other Klip Xtreme quality products, please visit our website www.klipxtreme.com.
II. Package contents
- Qi car wireless fast charging mount
- USB Type-C cable
- User guide
Product overview
Front view
- Adjustable side arms
- Telescopic knob
- Telescopic support pole
- Pivot knob
- Lever
- Suction cup
- Indicator light (both sides)
- Adjustable foot
- Silicone mat
Side view
- Adjustable side arms
- Touch button (both sides)
- Type-C charging port
- Charging head angle with pivot knob
- Vent clip
III. How to use your wireless charging mount
-
First, connect the USB end of the Type-C supplied cable into the device and the other end on the available USB power source. To enable fast wireless charging, it will require a QC2.0/QC3.0 USB power source.
-
The LED indicator light will alternatively flash green and then blue. It will remain solid green as soon as the device is connected.
-
Touch the button located on the right or left side of the platform to open both adjustable arms and place the phone on the charger.
The arms will lock automatically once the phone is placed on the charger and it will start charging immediately. The LED indicator will change to blue once it starts charging. -
If the phone is not charging, adjust the foot up or down until it starts wirelessly charging.
-
When the device is in Standby mode, the LED indicator lights up in green.
-
Press the button again to unlock the arms and take the phone out.
Note: The LED indicator light will start flashing and the device will stop charging if the current amount is too large or if there is a foreign object in the platform. Do not wireless charge the phone if a similar situation happens.
Technical specifications
| MPN | KMA-610 |
|---|
Device
Type| Car wireless fast charging mount
Mounting mechanism| Suction cup and air vent clip
Certification| Qi
Power output| 10W / 7.5W fast charging / 5W*
Power input| Type-C 5V/2A or 9V/1.67A
Coil| Single coil
Voltage (DC)/Current input| 5V/2A – CC 9V/1.67A – CC 12V/1.5A
Wireless charging efficiency| ≥75%
Max phone size supported| Maximum width 3.5in,
minimum width 2.5in
Max weight supported| 8.8oz
Charging compatible devices| IPhone, Samsung, Sony, etc.
Input power| USB Type-C cable
Special features| Quick-release button + automatic system operation + LED
charging indicator
Dimensions| 4.6×2.9×2.1in
Weight| 4oz
Material| ABS
*For activating wireless fast charging speeds a 1.8A QC 2.0/3.0 USB car
fast charging adapter is required. (Not included).
Wireless charging time depends on mobile phone brand.
Precautions
- Do NOT expose the wireless charging mount to excessive heat or to direct sunlight for long periods of time.
- Do NOT expose the device to rain or water, and avoid environments with high humidity or dust.
- Do NOT disassemble, repair or modify the unit yourself.
- Do not make sudden movements when placing or releasing the phone from the wireless charging mount
- Do NOT use cleaning products that contain benzene, solvents or alcohol.
- Do not place the magnetic strip or chip card (like an ID card, bank card, etc.) on the charging pad so it doesn’t lose magnetic power.
Recommendation
To ensure a firm bond, surfaces should be totally free of dirt before attaching the suction cup.
NOTES
KlipXtreme® is a registered trademark. All rights reserved. Other trademarks and trade names are those of their respective owners. Any mention of such is only intended for identification purposes, and therefore shall not be construed as a claim to any or all rights pertaining to those brands. Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>