KlipXtreme KTE-006 Touchbuds User Manual

KlipXtreme KTE-006 Touchbuds

Product Information: Touchbuds KTE-006

Main Features:

• True Wireless Stereo (TWS) earbuds with HD microphone
• Convenience to carry and charge them anywhere

Package Content:

• (1) KlipXtreme KTE-006 True Wireless Stereo (TWS) earbuds
• (1) Charging case
• (1) USB cable

Product Overview:

The product consists of the following components:

• Multifunction button
• Mode Pairing
• Hands-free mode
• Playback mode
• Volume control
• Previous track button
• Next track button
• Voice assistant activation button

Basic Operation:
Charging the Case and Earbuds:

1. To charge the case, plug the supplied USB cable into a power source and the Type C end into the case’s charging port. The case starts charging automatically. The LED screen displays the power level and blinks.
2. Once the case is fully charged, it displays 100 in the LED screen.
3. Unplug the charging case from the power source and place the earbuds on the sockets of the charging case.
4. While the earbuds are being charged, the LED indicator on each side of the earbuds lights up in red. When fully charged, the LED indicators turn off. This takes about an hour.
5. The fully charged earbuds have up to 4 hours of playtime or up to 80 hours of standby time. However, these times may vary depending on the mobile device used, the usage profile, and the type of files being played.
6. A low battery prompt will be heard to let you know that the battery is below the acceptable level to continue operating properly.

IMPORTANT: The touch button is sensitive. Therefore, please make sure to manipulate the earbuds by grabbing them from the arm to avoid tapping the touch button by accident.

Turning Your Earbuds On or Off:

1. Press and hold the multifunction button on each earbud for about 5 seconds. The power on prompt is heard, and the LED in both earbuds starts blinking white.
2. As both earbuds synchronize, a prompt is heard indicating that they are connected.
3. To turn the earbuds off, put them back in the charging case or press and hold the multifunction button on either earbud for about 5 seconds. The power off prompt is heard, and the white LED blinks briefly on both sides, then it shuts off.

Advanced Operation:
TWS Pairing:
Simply take the earbuds out of the charging case or turn them on as instructed previously. The earbuds sync with each other automatically and then enter into mobile pairing mode.

Introduction

Thank you for purchasing the KlipXtreme
KTE-006 True Wireless Stereo (TWS) earbuds with HD microphone. We encourage you to read this quick installation guide thoroughly to get the most out of this wireless device.

Main features

•  True wireless stereo (TWS) earbuds with smart touch technology to manage music, calls, and activate the voice assistant with just a tap
• Smart touch design to use the earbuds with a simple tap
• Compatible with Google and Siri voice assistant for true hands-free control with just one touch
• IPX3 water and sweat resistant
• 12 hours of total playback time and approximately 80 hours in standby mode3
• Charging case includes a LED screen to display battery percentage
• Features an HD built-in microphone for taking calls with clear sound quality
• Slim and compact charging case for maximum convenience to carry and charge them anywhere

Package content

•  Earbuds with TWS technology (2)
• Charging case (1)
• Type C charging cable (1)
• Quick installation guide  (1)

Product overview

1. Dust-proof mesh
2. Magnetic charging socket: place each earbud in the corresponding left and right side of the charging case for recharging.
3. Charging case LED indicator: the LED  displays the remaining battery level.
4. Charging port: insert the Type C cable in this port to charge the battery.
5. Built-in microphone: picks up your voice to enable hands-free calling and conferencing. Earbuds LED indicator: the LED turns solid red when charging the earbuds. Once the earbuds are fully charged the red light turns off.
6. Power/multifunction button: press the multifunction button to power the earbuds on and off. In addition, press this button to start and pause media and to answer or end an incoming call.

Multifunction button

5 seconds to enter pairing mode
Hands-free mode| Press any button to answer and end an incoming call. Press and hold for about 2 seconds to reject or ignore an incoming call
Playback mode| Press the right or left button to play and pause audio
Volume –| Press 3 times the left button
Volume +| Press 3 times the right button
Previous track| Press twice the left button
Next track| Press twice the right button
Voice assistant| Hold 1.5 second any button to activate Siri or Google commands

LED indicators on the charging case or earbuds

case. The earbuds will pair automatically. If not, press and hold 5 seconds to enter pairing mode
Power Off| The LED lights blink in red and then turn off

Basic operation

Charging the case and earbuds

1. To charge the case, plug the supplied USB cable into a power source and the Type C end in the case’s charging port. The case starts charging automatically. The LED screen displays the power level and blinks.
2. Once the case is fully charged it displays “100” in the LED screen.
3. Proceed to unplug the charging case from the power source and place the earbuds on the sockets of the charging case.
4. While the earbuds are being charged the earbuds LED indicator lights red on each side. When fully charged, the LED indicators turn off. This takes about an hour.
5. The fully charged earbuds have up to 4 hours of playtime or up to 80 hours of standby time. However, these times may vary depending on the mobile device used, the usage profile, and the type of files being played.
6. A low battery prompt will be heard to let you know that the battery is below the acceptable level to continue operating properly.

IMPORTANT: The touch button is sensitive. Therefore, please make sure to manipulate the earbuds by grabbing them from the arm to avoid taping the touch button by accident.

Turning your earbuds on or off

1. Press and hold the multifunction button on each earbud for about 5 seconds. The “power on” prompt is heard and the LED in both earbuds starts blinking white.
2. As both earbuds synchronize, a prompt is heard indicating that they are connected.
3. To turn the earbuds off, put them back in the charging case or press and hold the multifunction button on either earbud for about 5 seconds. The “power off” prompt is heard and the white LED blinks briefly on both sides, then it shuts off.

Advanced operation

TWS pairing
Simply take the earbuds out of the charging case or turn them on as it has been instructed previously. The earbuds sync with each other automatically and then enter into mobile pairing mode.

Note: Before installing this product, please make sure your device is Bluetooth® compatible.

Pairing the earbuds with your mobile device

1. Turn both earbuds On by removing them from the charging case or pressing the multifunction button for about 5 seconds. Both earbuds will automatically pair.
2. Set your Bluetooth® mobile device to “discover” the wireless earbuds.
3. Place the earbuds and your phone not more than three feet from each other.
4. The LED light in one of the earbuds slowly blinks in white and the LED light in the other one turns off. Both are ready to enter pairing mode.
5. On your mobile phone, tap the newly discovered audio device KTE-006 being displayed in the Bluetooth® list.
6. When the mobile device asks if you want to pair with it, click Yes or OK to accept.
7. If pairing is successful the “connected” prompt is heard and the earbud LED indicator turns off.
8. If after 60 seconds the pairing process fails, please repeat steps 1 through 6 as described above.
9. The earbuds automatically go into standby mode after a short period of inactivity to save battery life.
10. You only need to pair the earbuds with your mobile phone once, as they will reconnect with memorized devices automatically.

Using the wireless earbuds
Answering and ending a call

• When there is an incoming call, your phone will ring along with a tone through your earbuds.
• Press the multifunction button once on any earbud to pick it up. You may also press the answer button on your mobile phone to receive the incoming communication in your earbuds.
• To end a call, press the multifunction button once again on any earbud. Likewise, you may also finish the call directly using the end key on your smartphone.
• To ignore an incoming call and send the caller to voicemail, press and hold the multifunction button on any earbud for about two seconds.

Music playback and voice commands  using your earbuds

• Press the multifunction button on either one of the earbuds to play and stop audio playback.
• Press the right button twice to go to the next track.
• Press the left button twice to go to the previous track.
• Press the left button 3 times to lower the volume.
• Press the right button 3 times to increase the volume.
• When audio is being played or paused, press any button for 1.5 second to enable the voice assistant for Google or Siri. Press again 1.5 second any button to turn it off.

Troubleshooting

If you can’t connect the earbuds to your mobile phone, try the following:

• Make sure that the earbuds are charged, turned on, paired with, and connected to your mobile phone.
• Make sure the Bluetooth® feature is activated on your phone.
• Check that the earbuds are within 30 feet of your mobile phone and that there are no obstructions between the earbuds and the phone, such as walls or other electronic devices.

Precautions

• Do NOT use cleaning solvents or strong chemicals to clean the device.
• Your earbuds are powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with compatible chargers.
• Unplug the USB charger from the source when not in use.
• Parts of the earphones are magnetic. Metallic materials may be attracted to the earbuds. Do not place credit cards or other magnetic storage media near the earbuds, as information stored on them may be erased.
• Do NOT drop, hit, or shake the device.
• Do NOT disassemble, repair or modify the earbuds yourself.

Technical specifications

Earbud: 0.6×1.2in
Weight| 1.09oz
Cable length| 19.7in
Package contents| Earbuds, charging case, quick installation guide, Type C charging cable

1. Range estimate is based on an area free and clear of obstacles and interference, and within the line of sight between devices.
2. Depending on the volume level and type of music file being played.
3. Battery runtime can last 4 hours per charging cycle (3) for an  estimated total of 12 hours combined.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

KlipXtreme® is a registered trademark. All rights reserved. The Bluetooth® brand is a registered trademark owned by Bluetooth SIG, Inc. Siri and all related logos are trademarks of Apple.com, Inc. Google Assistant is a trademark of Google LLC. All other brand names and trademarks are the property of their respective owners. Any mention of such is only intended for identification purposes, and therefore shall not be construed as a claim to any or all rights pertaining to those brands. Made in China.
www.klipXtreme.com.

References

• Apple
• Home - Klip Xtreme

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>