Klipxtreme Wireless Earbuds User Manual

: June 7, 2024
: KlipXtreme

Table of Contents

Introduction
Product overview
Basic operation
Advanced operation
Using the wireless earbuds in hands-free mode
Troubleshooting
Technical specifications
FCC statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KSM-750
Dynamik

Klipxtreme Wireless Earbuds

Introduction

Thank you for purchasing the KSM-750 sport earbuds with Bluetooth ®wireless technology.
We encourage you to read this quick installation guide thoroughly to get the most of this wireless audio accessory.

Main features

Sports earbuds with hooks for a better fit
Bluetooth ® V5.0 for greater wireless range
Ultra-light design
IPX7 waterproof rating
Provides about 16 hours of playback time
Ergonomic hooks that won’t fall during intense sport activities
HD microphone with noise reduction technology for hands-free conversations
Tangle-free cord
Includes three interchangeable sets of ear tips for the perfect fit
Built-in multifunction button for power, music, and phone call management

Package content

Wireless earbuds 1
Set of silicone ear tips 3
Micro-USB charging cable 1
User’s guide 1

Product overview

Klipxtreme Wireless Earbuds - overview

Ear hooks
Earbuds
Volume +
Volume –
Micro-USB charging port
Multifunction button (play/pause/answer-hang up call/redial/reject call
LED indicator: For power/battery charging/and Bluetooth ® status
Microphones

Button	Function
Multifunction button	Briefly press this button to play and pause media.

Briefly press this button once to answer an incoming call (music will be paused). Briefly press this button once to end a call (music will resume). Press and hold this button for about 2 seconds to reject an incoming call.
Volume up/next track button| Press this button briefly to increase the audio level of the earbuds.
Press and hold this button to play the next track. Double click this button to activate voice control.
Press and hold the + and – buttons simultaneously for 1 second to redial the last number dialed. (on supported devices)
Volume down/ previous track button| Press this button briefly to decrease the audio level of the headphones. Press and hold this button to play the previous track.
Led indicator| LED indicator turns blue when the earbuds are powered on LED indicator turns red when the earbuds are powered off LED indicator flashes red when the battery level is low LED indicator flashes red and blue when the earbuds are in pairing mode.
Micro-usb charging port| Insert the Micro-USB cable here to recharge the battery.

Basic operation

Charge your earbuds

Connect the Micro-USB end of the supplied cable into the charging port of the earbuds and the other end into the USB port of your computer or to a 5VDC USB adapter to charge the battery.
Make sure that your earbuds are fully charged before using them for the first time.
The earbuds battery has to be initially charged for at least 3 hours. Thereafter, the battery will take around 2 hours to recharge.
While the earbuds are being charged, the LED light glows red. The status LED light turns solid blue once it has reached full capacity.

Turning your earbuds on and off

Press and hold the multifunction button. The LED indicator will turn blue for 1 second.
To power off the device, press and briefly hold the multifunction button. The LED indicator will turn red and the earbuds will turn off.

Advanced operation

Note: Before using this product, please make sure your device has the built-in Bluetooth ® feature available.
Pairing the earbuds with your mobile device

Place the earbuds and the mobile device not more than one meter away from each other.
Set your Bluetooth ® phone to “discover” the wireless earbuds.
Press and hold the multifunction button for several seconds to turn the earbuds on.
The LED indicator will flash alternating between blue and red, and the device will automatically enter into the pairing mode.
On your mobile phone, tap the newly discovered audio device (KSM-750) displayed in the Bluetooth ® list.
When the mobile phone asks if you want to pair with the earbuds, click YES or OK to accept.
If you have a lower Bluetooth ® version, you may be prompted to enter the passkey 0000 (4 zeros).
If pairing is successful, the device will generate a short tone. If after 60 seconds the pairing process fails, please turn off the headset and repeat steps 1 through 6 described above.
The earbuds will enter into standby mode and will eventually turn off automatically after five minutes if there is no Bluetooth ® device available for pairing.
Note: The earbuds will automatically pair to the last known connected device in 3 seconds after the earbuds are powered on.

Using the wireless earbuds in hands-free mode

Answering and ending a call using your mobile phone

When there is an incoming call the LED indicator will flash blue and an alert tone will be heard through the earbuds. Briefly press the multifunction button to pick it up. You may also press the answer button on your smartphone to take the call (music will be paused).
To end a call, simply press the multifunction button once again. Likewise, you may also finish the call directly using the end key on your mobile (music will resume automatically).
To reject an incoming call, press the multifunction button for about 1 second.
If you want to redial the last number called, press and hold the volume + and volume – button at the same time for 1 second.
To activate voice control double press the multifunction button quickly. The voice control function activation depends on each particular device.

Music playback

Briefly press the multifunction button to reproduce music. Press it once to pause the music, press it again to resume playing.
Press and hold the + and – buttons for 1 second to go to the next or previous track.
Briefly press the + and – buttons to increase or decrease the volume on the earbuds.
When listening to music using your smartphone, playback will pause to allow the call to go through.
As soon as you hang up, music playback will resume automatically.

Troubleshooting

a. The earbuds are not pairing Make sure that you increase the volume of the earbuds and the mobile device. Some smartphones require to set up of the Bluetooth ®headset as an audio output device before the sound is transmitted. Please check the instruction manual of your mobile device for details. If you are using a music player or another Bluetooth ®device, make sure that it supports the A2DP stereo music profile.
b. The caller can’t hear my voice clearly Adjust the volume on your mobile device and earbuds. Make sure that there is no source of interference nearby. Stay close to your smartphone.

Technical specifications

MPN	KSM-750
Form factor	Sport earbuds
Driver unit	6mm
Maximum power output	5mW
Frequency	20Hz-20kHz
Impedance	160
Sensitivity	93dB at I kHz
Buttons	Volume +/next track, multifunction, volume -/ previous track

Special features Stabilizing hooks	Silicone
Cable design	Tangle-free
IP Rating	IPX7 waterproof

*Depending on the volume level and type of music file being played.
**Range estimate is based on an area free and clear of obstacles and interference and within the line of sight between devices.

Precautions

Do NOT drop, hit or shake the device.
Do NOT disassemble, repair or modify the earbuds yourself.
Do NOT use cleaning products that contain benzene, solvents or alcohol.
Do NOT expose earbuds to excessive heat or to direct sunlight for long periods of time.
Do NOT store the device in a place with high humidity or dust.
Do NOT place heavy objects on top of the earbuds.
Do NOT use near a microwave oven or wireless LAN products.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

KlipXtreme® is a registered trademark. All rights reserved.
The Bluetooth® word mark is owned by Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners. Any mention of such is only intended for identification purposes and is not to be construed as a claim to any rights pertaining to, sponsorship by, or affiliation with, those brands. Made in China.