Alterseat Chair Instructions
- June 6, 2024
- Alterseat
Table of Contents
Your Trusted Office Furniture Manufacturer
INSTRUCTION MANUAL
ALTERSEAT (M) SDN. BHD.
Add: B-1, 20, Jalan Persiaran Jalil 1, Bukit Jalil, 57000 Kuala
Lumpur Tel: (+60) 16 601 8581
Web: www.alterseat.com
INTRODUCTION
Welcome to the Alterseat Team and thank you for altering your ergonomic
experience with us. This product is manufactured and designed solely by
Alterseat (M) Sdn. Bhd. We specialize in producing and manufacturing office
chairs for over 20 years including other furniture.
Before proceeding into this manual, ensure that after unpacking and before any
assembly, all items and parts of the installation area are clear of any
damages. If there are any damages found, immediately contact our customer
service number 03-5033 2690 for assistance.
This product is intended for indoor use. Kindly take time to read and follow
the instructions provided in the following pages. Install as described and
guided in this installation manual. We accept no liability for damages caused
for any improper use.
From,
Team Alterseat
PARTS OF THE CHAIR
TOP PIECE
LEG
HEADPIECE
ATTACHING THE HEADREST
HEADPIECE
INSTRUCTIONS
A. Using the Allen Key provided, remove the 2 screws (loosely attached) to the
headrest area of the top piece.
B. Align the headrest according to the 2 pilot holes and tighten the screws
with the same Allen Key provided.
INSERTING THE ACRYLIC TAG
ACRYLIC TAG
C. Gently insert the
Alterseat Acrylic Tag, starting from the bottom of the tag. You will hear a
‘Click’ sound when it is tightly locked.
CONNECTING THE BACK PIECE
BACK PIECE W SEAT PIECE
INSTRUCTIONS
D. At the base of the back piece, remove all 3 screws that are loosely
attached with the larger Allen Key provided.
E. Align the back piece to the seat piece. Reattach the 3 screws in the same
triangle shape. Tighten with Allen Key provided
INSTRUCTIONS
F. If your seat looks like this, congratulations! You have successfully
connected the back piece and seat piece together. You have now assembled the
Top Section of your chair. Keep going!
CONNECTING THE GAS LIFT
GAS LIFT W ALUMINUM BASE
INSTRUCTIONS
G. Insert the wider end of the Gas Lift into the Aluminum Base.
Note: No ‘click’ sound will be heard.
CONNECTING THE TOP PIECE W LEG
TOP PIECE W LEG PART
INSTRUCTIONS
H. Slant the ‘Top Piece’ on one side. Then insert the ‘Leg’ from a side angle
to connect both segments together.
I. Once both parts are successfully connected, lift your chair in an upwards and straight direction. You are now ready to sit with Alterseat!
ADJUSTING YOUR SEAT
ARMREST
INSTRUCTIONS
A. Left and Right: Move Handles Side To Side
B. Up and Down: Press Button Under Armrest
HEADREST
INSTRUCTIONS
C. Height: Adjust in an upward and downward motion
D. Angle: Tilt forward or backward
HEIGHT, RECLINE & INCLINE
INSTRUCTIONS
E. Lever: To go lower, sit while pushing the lever down. To go higher, stand
while pushing the lever down.
F. Recline & Incline: To recline, pull lever outwards and lean backward. To
lock position in place, push lever inwards. To incline, pull lever outwards,
lean backward, and slowly return to the original position.
LUMBAR SUPPORT
INSTRUCTIONS
G. Turn knob clockwise for lumbar support to roll downwards. Turn knob
anticlockwise for lumbar support to roll upwards.
Your Trusted Office Furniture Manufacturer
THANK YOU
References
- Alterseat | Office Chairs | Office Malaysia | Office Chairs Malaysia arrow down arrow down search search profile cart profile cart menu cart cart cart cart cart cart icon-facebook icon-instagram icon-youtube icon-whatsapp
- Alterseat