FUSION Cordless Finish Nailer F-15XP Gen. 2 Instruction Manual
- June 6, 2024
- FUSION
FUSION Cordless Finish Nailer F-15XP Gen. 2 Instruction Manual
DANGER:
The Fusion tool is charged with compressed air in a sealed chamber. Prior to
any service or repair, release the charge of pressurized air. The pressurized
air must be released prior to service. Major components such as the
piston/driver assembly, gearbox, piston stop and guide body are all part of
the drive assembly.
Deliberate tampering with the drive assembly may result in the release of the
driver. Any repair or upgrade requiring access to the pressure chamber may be
handled by an authorized Senco dealer or service center.
General Assembly
Left Body Half
GROUP B Right Body Group
Magazine Assembly
Mechanical Group
Pressure Vessel Assembly
PISTON-DRIVER ASSEMBLY
GROUP D FRONT PLATE ASSEMBLY
Cap ASSEMBLY
PART NO. |
DESCRIPTION |
AA0294 |
Cap |
CB0044 |
Valve |
CC0321 |
Seal |
LB0010 |
O-Ring |
PART NO. |
DESCRIPTION |
--- |
--- |
AA0267 |
Cap Assembly |
GROUP E ELECTRONICS GROUP
PART NO. |
DESCRIPTION |
AF0116 |
Switch |
VA0110 |
PCB Assembly |
GROUP F Trigger Assembly
PART NO. |
DESCRIPTION |
VB0205 |
Trigger Assembly |
Safety Cover Assembly
PART NO. |
DESCRIPTION |
HA0336 |
Safety Cover Assembly |
GROUP H Bracket Group
PART NO. |
DESCRIPTION |
GF0118 |
Bracket |
KB6626 |
Locknut |
KB6632 |
Screw |
Belt Hook Assembly
PART NO. |
DESCRIPTION |
AA0172 |
Belt Hook Assembly |
GROUP K BATTERY
PART NO. |
DESCRIPTION |
VB0155 |
Battery |
GROUP L BATTERY CHARGER
PART NO. |
DESCRIPTION |
VB0156 |
Battery Charger |
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format) >>
Download this manual >>