LAMAX Trims1 Wireless Headphone User Guide
- June 6, 2024
- LAMAX
Table of Contents
LAMAX Trims1 Wireless Headphone
Controls
Switch on| Hold down multifunction button for
3 seconds
---|---
Switch off| Hold down multifunction button for
5 seconds
Play / Pause **| Press multifunction button
Next track**| Double-tap multifunction button on the
right earphone
Previous track| Double-tap multifunction button on the
left earphone
Accept call **| Tap multifunction button
End call **| Double-tap multifunction button
Reject Call| Hold down multifunction button for
2 seconds
Redial last number| Triple-tap multifunction button
Activate mobile assistant ****| Hold down multifunction button for
2 seconds
Switching on
The headphones turn on automatically when removed from the charging station.
To switch on manually, hold down the multifunction button for 3 seconds. You
must manually turn on both headphones separately. An alert is heard when the
device is switched on.
Switching off
The headphones switch off automatically when docked in the charging station.
To switch off manually, hold down the multifunction button on both headphones
for 5 seconds. An alert is heard when the device is switched off.
Pairing
- Remove the headphones from the charging station. The headphones will connect to each other automatically and an alert will sound. The headphones will be ready for pairing. This is indicated by the alternating flashing of the white and green LEDs.
- Turn on Bluetooth on your device and search for LAMAX Trims1 in the list of available Bluetooth devices. An audio alert will sound once the device and headphones have been successfully paired.
If you encounter any problems while attempting to pair the headphones with a device, remove the headphones from the charging station. Remove the headphones from the list of paired devices on your phone. Then, insert the headphones into the charging station and pair according to point 1.
Charging
To recharge the charging station, connect the cable to the USB-C port on the
back of the charging station and connect the other end of the cable to a USB
power supply with a maximum voltage of 5V. When charging, the LED will flash
green. It will show a steady green glow when fully charged. To charge the
headphones, dock them into the charged charging station. When charging, the
LED in the headphones lights up green and the LED on the charging station
lights up white. When the headphones are fully charged, the LEDs will
deactivate.
Parameters
| Wireless technology | Bluetooth 5.0 |
|---|---|
| Maximum pairing distance | up to 10 meters |
| Supporting codecs | AAC, SBC |
| Headphone battery capacity | 60 mAh |
| Charging station capacity | 400 mAh |
| Headphone charging time | approx. 1,5 hours |
| Playback time | up to 6 hours |
| Weight of each headphone | 4 g |
| Weight including charging station | 45 g |
Printing errors reserved.
The current version of the user manual can be downloaded here: https://www
.lamax-electronics.com/downloads/lamax-trims1/manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>