DIGITUS DS-55505 HD BaseT 2.0 KVM Extender Set User Manual
- June 6, 2024
- DIGITUS
Table of Contents
DIGITUS DS-55505 HD BaseT 2.0 KVM Extender Set User Manual
Introduction
With the DIGITUS® HDMI® HDBaseT™ 2.0 KVM Extender Set, you can control your source device at a distance of up to 100 meters using a single CAT5e/6/7/8 cable connection with uncompressed 4K-HDMI® video content and access to up to 6 connected USB devices. This extender was specially developed for smooth and easy setup. HDBaseT™ 2.0 enables installation using a single cable, avoiding the laborious relocation of multiple cables. A typical application would be a multi-room solution in which the source device and display can be at a distance of up to 100 m. From the receiver, you can use up to 6 USB devices that are connected to the transmitter module, and of course you can enjoy video and audio content. A very easy KVM functionality when it comes to installation and application. Instead of relocating multiple cables, use a single RJ45 network cable or the existing network connections (point-to-point) with the HDMI® HDBaseT™ 2.0 Extender from DIGITUS®.
Package Content
Ports and Interfaces
RX (Receiver) TX (Sender)
Front:
Back:
- DC 12V: DC 12V In
- HDBaseT IN: Standard HDBaseT Signal Input Port. Connect HDBaseT Receiver with a Cat5e/6/7 Cable.
- HDMI OUT: Connect to an HDMI Equipped TV/monitor
- USB Type A: Connect to USB peripheral devices such as printer, keyboard, mouse, U-disk etc.
- Earphone: Connect to Stereo Audio output Device
- Microphone: Connect to Microphone Audio input Device
- HDBaseT OUT: Standard HDBaseT Signal Output Port. Connect HDBaseT Receiver with a Cat5e/6/7 Cable.
- HDMI IN: Connect to Input Sources via HDMI Male Input Port
- USB Type B: Connect from PC or Laptop for data transmit to or control from the Receiver’s USB-A slots.
- DC 12V: DC 12V In
- USB Type A: Connect to USB peripheral devices such as printer, keyboard, mouse, U-disk etc.
- Power: Power LED Indicator
Link:
No Connection: Keep Lighting off
Get Connection: Keep Lighting on
HDCP:
Signal with HDCP: Keep Lighting on
Signal with No HDCP: Flash Quickly
Features
- Transmit high-resolution multimedia content without a loss of quality and uncompressed over distances of up to 100 m
- Saves unnecessary cable relocation and pools multimedia signals along with many other signals in a single network cable
- Forwarding without loss of quality through transmission of uncompressed data
- Supports HDBaseT™ 2.0 via CAT5e/6/7/8 cable up to 100 m
- Supports transmission of video, audio and USB signals via network cable
- Supports Full 3D, 1080p, 4K@60Hz (YUV 4:2:0)
- Supports USB 2.0 features (HighSpeed) for up to 6 USB devices
- Supports CEC (Consumer Electronics Control)
- Supports uncompressed audio transmission (LPCM7.1)
- Supports compressed audio transmission (DTS, Dolby Digital incl. DTS-HD Master Audio™ and Dolby TrueHD)
Connection Diagram
Specification
Note: Specifications are subject to change without notice.
This is a Class A product. In home environment, this product may cause radio
interference. In this case, the user may be required to take appropriate
measures.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is
part of the shipping content. If the Declaration of Conformity is missing, you
can request it by post under the below mentioned.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>