ROCKVILLE RATV65L Powered Bluetooth Marine Speaker with LED and Remote Control Owner’s Manual

: June 6, 2024
: RockVille

Table of Contents

Includes
Multifunction Handle Bar Remote Control
Installation
Multifunction Remote Control
Bluetooth
AUXILIARY CONNECTION
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OWNER’S MANUAL
RATV65L/RATV8OL
POWERED BLUETOOTH ATV/UTV/MARINE SPEAKER w/LED and REMOTE CONTROL

Thank you for purchasing this Rockville product. Please read this installation guide carefully for proper use of your Rockville RATV-L. Should you need assistance. please call our technical helpline at 1-646-758-0144, Monday through Friday, 9 am to 5 pm EST.

Includes

Speaker system
4 Heavy-duty mounting straps with velcro closures
5-foot 3.5mm – 3.5mm mini-jack MP3 cable
Multifunction remote control (water-resistant) with 3.5mm jack
Cigarette lighter power connector
LED wireless remote control
Wired audio remote control with a handlebar mount

Multifunction Handle Bar Remote Control

The RAN-L series comes with a multifunction remote control. The remote conveniently mounts to the handlebars for easy access. The unit is waterproof and features oversized buttons for use with gloves.

ROCKVILLE RATV65L Powered Bluetooth Marine Speaker with LED and Remote
Control - fig2 Functions

Wired handlebar remote control (see below for details).
3.5mm auxiliary input
Mounting straps
12V cigarette lighter power adapter
12V cigarette lighter power connector

ROCKVILLE RATV65L Powered Bluetooth Marine Speaker with LED and Remote
Control - fig1

Installation

The RATV-L can be powered by your vehicle’s cigarette lighter port, or it can be wired directly to the ignition using the included cigarette lighter power connector. The RED wire goes to the RED ( + ) wire of the ignition harness. The BLACK wire will serve as a ground connection. It should be connected to the vehicle chassis. When connecting the ground wire make sure that there is no paint or other insulator blocking the ground connection.
To mount the RATV-L to your vehicle, use the four heavy-duty mounting straps included in the accessories package. Please ensure that the straps are pulled tight and the unit is strapped down properly to prevent any damage from occurring.

Multifunction Remote Control

1. Turn-On/Standby: Turn on the unit or switch to standby mode.
2/4. Dynamic Mode. Use to switch to dynamic mode from static color mode or to switch between the 22 dynamic modes.
3. Dynamic Mode Speed: Use to adjust dynamic mode speed. If the unit is in static mode, pressing either of these buttons will activate the dynamic mode.
5. Static Color Adjust: Use to switch between the 20 static colors. if the unit is in dynamic mode, pressing either of these buttons will activate the static mode.
6. Direct Color Select: Use to select preset static colors.
7. Demo Mode: Press this button to activate demo mode. While in demo mode, the unit will loop through 17 of the dynamic repeating each mode three times.
8. Brightness Adjust: Use these buttons to adjust brightness while in static mode. Pressing these buttons while the unit is in dynamic mode will switch it to static mode.

PLEASE NOTE: Be sure to remove the plastic cover from the battery compartment. The remote uses a 3-volt CR2025 battery (included). When replacing the battery be sure to use the same type.

Bluetooth

To pair the unit with your Bluetooth-enabled device follow the simple steps below and you’ll be listening to your favorite tunes in no time.

Make sure that your device is set to “Discoverable.” Power on the RATV-L unit and it will automatically begin to search for discoverable Bluetooth devices. The LED on the handlebar remote will flash two times every second. This indicates that it is searching.
Once a Bluetooth device is found, the unit will go into pairing mode. You will hear a long tone and the LED will flash once every second until pairing is complete. Look for and select RATV-L from your device’s list of available Bluetooth devices. Once paired the LED will remain on.
If the unit is disconnected from the device it is paired to. it will automatically try to pair with that device the next time it is turned on. If the previous device is not found within 4 seconds. the remote control will begin to search for other discoverable devices.

AUXILIARY CONNECTION

To connect a non-Bluetooth device. the RATV-L features a 3.5mm input port. It is located on the front of the unit. Simply use the included 3.5mm to 5mm mini jack cable to connect the device to the RATV-L. Please note that connecting a device to the auxiliary port will stop Bluetooth function.

Specifications

RATV65

500 Watts Total Peak System Power 600 Watts Total Peak System Power
125 Watts RMS Each Speaker x 2 150 Watts RMS Each Speaker x 2
Twin 65 woofers with High Excursion Twin 8′ Woofers with High Excursion
Frequency Response: 40Hz – 20KHz Frequency Response: 35Hz – 20KHz
Two PEI Tweeters Two T PEI Tweeters
Dimensions: 7.7– (H) x 28.T (L) x 11.7′ (0) Dimensions: 9.3 (H) x 32.4– (L) x 12.1 (D)

L RATV8OL

600 Watts Total Peak System Power
150 Watts RMS Each Speaker x 2
Twin 8″ Woofers with High Excursion
Frequency Response: 35Hz — 20KHz
Two 1″ PEI Tweeters
Dimensions: 9.3– (14) x 32.4″ (L) x 12.2″ (D)

Features

Perfect for AN. snowmobiles, off-road vehicles. and other marine applications
Bluetooth-enabled high-fidelity audio streaming from iPhone/Android/Tablet
Completely waterproof marinized system
Injection-molded cone with rubber surround
Linear progressive CONEX spider
Built-in capacitor crossover network
Extended frequency response with superb bass and clear highs
All speakers are forward-firing so you can hear the music clearly while Tiding
Automatic pairing with in-range reconnect
Handlebar-mounted waterproof multifunction remote control
5mm auxiliary audio input
Shockproof design
ABS weather-resistant grills and hardware
Includes heavy-duty mounting straps with velcro closures and all power connection cables
Quick and easy installation