KOMODO KDPOR20TLTB20L Portable Toilet User Guide
- June 6, 2024
- KOMODO
Table of Contents
USER GUIDE
20L PORTABLE TOILET
KDPOR20TLTB
SAFETY & WARNINGS
- Never add the toilet cleaning fluid to the freshwater tank.
- Make sure you have enough water in the freshwater tank prior to use.
- Do not lean on the back cover of the toilet whilst upright.
- Clean the waste holding tank regularly.
- Avoid long-term exposure to direct sunlight.
- Avoid high temperatures (over 60°C, 140°F)
- Children should be supervised when using this toilet.
STORAGE INSTRUCTIONS
- Remove all water from the tanks, pump assembly before storing.
- Store the portable toilet in a dry, clean area.
OVERVIEW
1 Outlet
2 Tank Cap
3 Gasket (x2)
4 Tank Cover
5 Lock Buckle (x2)| 6 Slide Valve
7 Waste Holding Tank
8 Gasket
9 Waste Holding Tank Cover
10 Fresh Water Tank| 11 Seat Cover
12 Fixed Plug (x2)
13 Piston Pump Assembly
14 Core Vent Assembly
---|---|---
OPERATION
Preparing
Before use, make sure that the pressure in the waste holding tank is equalized by opening and closing the slide valve with the seat cover closed.
-
Separate the tanks (fig. 1)
-
Remove pour-out spout cap while it is pointing upward and then add appropriate
deodorant (fig.2). Replace cap and tighten securely. -
Combine the tanks and close the slide valve (fig.3)
-
Remove the cap of the freshwater tank and fill it up with the appropriate amount of freshwater. Screw the cap again on the freshwater tank. (fig.4)
Never add deodorant to the freshwater tank.
Flushing -
Pull out the slide valve to allow the waste to pass into the waste holding tank. (fig.5)
-
Press the pump to flush the portable toilet. (fig.6)
-
Close the slide valve.
Emptying the Waste Holding Tank
- Do not overfill the tank. Open valve to check visually.
- Be sure the valve handle is closed. Separate tanks.
- Carry the waste holding tank to a permanent toilet to empty
- Remove pour-out spout cap while it is pointing upward.
- If there is a water supply, flush out the waste holding tank.
Never empty the waste holding tank directly into the environment.
SPECIFICATIONS
Freshwater tank
Waste holding tank
Weight
Dimensions (LxWxH)
Colour
Material| 13L
20L
4.9kg
404 x 354 x 391 mm
White
PP, PE, HDPE, ABS
---|---
Need more information?
We hope that this user guide has given you the assistance needed for a simple
setup.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to
help.kogan.com