ARIA 64858691 Framed Exhaust Mount Installation Guide
- June 15, 2024
- Aria
Table of Contents
Framed Exhaust Mount [Luxe]
Installation Guide
64858691 Framed Exhaust Mount
Dry-fit Base into vent opening.| Ensure flange is flat to the wall.
Use screws to fasten as needed.
Measure base of ventilation fan to check if adjustments need to be made to the
Framed Exhaust Mount opening.| Measure Body. If adjustment is necessary, cut
along perforated edges according to sizes in step #2.
Some fan flanges can obstruct holes needed to slide on the Tray (step 8).
If this is the case, trim flanges of fan.| Peel and stick provided sound
dampening strips along the edges of the opening.
Insert and fasten fan with screws. Sound damping strips should be sandwiched
between fan and Body.| Paint inside of the Body and Tray to match ceiling
colour. Do not paint fan.
Insert and slide Tray into place.
Use hole on the side of the Tray as a guide.| Enjoy!
Additional Support
support@ariavent.com /
www.ariavent.com
www.driavent.com/pages/patents
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>