VOLTCRAFT Car USB-charger CPS-3000/2C Instruction Manual
- June 6, 2024
- VOLTCRAFT
Table of Contents
VOLTCRAFT Car USB-charger CPS-3000/2C
Operating instructions
Intended use
The product is suitable for charging and operating USB devices in vehicles.
Power supply is via a car cigarette lighter socket. The product features a
USB-A and a USB-CTM port. The USB ports are protected against overload and
short-circuit. It is only allowed to be used inside the car, not outdoors.
Avoid contact with moisture at all costs.
For safety and approval purposes, you must not rebuild and/or modify this
product. If you use the product for purposes other than those described above,
the product may be damaged. In addition, improper use can cause hazards such
as short circuiting, fire, electric shock etc. Read the instructions carefully
and keep them. Make this product available to third parties only together with
its operating instructions.
This product complies with the statutory national and European requirements.
All company names and product names are trademarks of their respective owners.
All rights reserved.
Delivery content
- Car USB-charger
- Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website
www.conrad.com/downloads or scan the printed QR code. Follow the instructions
on the website.
Description of symbols
The symbol with a flash in a triangle indicates health risks e.g. due to
electric shock.
The symbol with an exclamation mark in a triangle indicates important
instructions contained in these operating instructions that must be followed.
The arrow symbol alerts the user to the presence of important tips and notes
on using the device.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
- The device is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. These may become dangerous playing material for children.
- Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, vapours and solvents.
- Do not place the product under any mechanical stress.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
- Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
- Also observe the safety and operating instructions of any other devices which are connected to the product.
- Always turn the connected appliance off before connecting or disconnecting it.
- Disconnect the USB car charger when not in use.
- The product gets hot during use. Ensure sufficient ventilation and never cover the product during use.
- Do not short-circuit the USB outputs.
- Never use the product immediately after it has been brought from a cold room into a warm one. The condensation generated could destroy the product. Allow the device to reach room temperature before connecting and using it. This may take several hours.
- Consult an expert when in doubt about operation, safety or connection of the device.
- Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop.
- If you have questions which remain unanswered by these operating instructions, contact our technical support service or other technical personnel.
Operating elements
- Cigarette lighter plug
- LED indicator light
- USB-A port
- USB-CTM port
Operation
Always switch off the USB device to be connected before connecting it to a USB
port. Make sure the connection is correct. If the product is not connected
properly, it could overheat or cause an electric shock or fire.
Make sure the USB device matches the specifications of the USB car charger.
Observe the information in chapter “Technical data”.
• The product can charge two USB devices at once. Connect one or two powered
down USB devices to the USB-A (3) and/or USB-CTM port (4). USB-CTM connections
are common in many newer devices such as mobile telephones.
• Connect the cigarette lighter plug (1) to the cigarette lighter socket in
your vehicle. The LED indicator lamp (2) lights up and indicates, that the
product is ready for operation.
• The connected USB device is now charging. Should you wish to operate the USB
device, you may turn it on now.
• Turn off the connected USB device before disconnecting it from the USB port
or before disconnecting the USB car charger from the cigarette lighter socket.
• Unplug the cigarette lighter plug from the cigarette lighter socket after
use.
You may use the USB car charger with the engine running or off. However, avoid starting the engine while the product is connected as this cuts power to the cigarette lighter socket briefly (this may not apply to all vehicle models). If the engine is switched off, drawing current over a longer period of time will discharge the vehicle battery.
Cleaning and care
• Always disconnect the USB car charger from the cigarette lighter socket and
all connected USB devices from the USB ports before cleaning.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or
other chemical solutions since these can penetrate the housing or impair
functionality.
• Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines. You thus fulfill your
statutory obligations and contribute to the protection of the environment.
Technical data
Input voltage/current………………………………….. 10 – 30 V/DC 1.6 A
Output voltage ………………………………………….. 5 V/DC
Total output power …………………………………….. max. 3 A (for both USB ports), 15 W
Output current per USB port……………………….. USB-CTM port: max. 3.0 A / USB-A port: max. 2.4 A
Operating conditions………………………………….. 0 to +40 °C, 10% – 95 % RH
Storage conditions…………………………………….. -10 to +55 °C, 5% – 95 % RH
Dimensions (L x Ø)……………………………………. 56 x 28 mm
Weight …………………………………………………….. 20 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is
prohibited. This publication represents the technical status at the time of
printing.
Copyright 2020 by Conrad Electronic SE. *2290454_v2_1020_02_jc_m_en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>