LAMAX Muse2 Wireless Headphone User Guide
- June 6, 2024
- LAMAX
Table of Contents
Muse2
Controls
On
Off
Pairing
Play / Pause
Next / Previous Track
VOL + / VOL –
Answer / End Call
Reject Call
Redial the last call
Activate Mobile
Assistant| Hold for 2 seconds
Hold for 2 seconds
Hold for 4 seconds
Press
Hold / hold
Press / press
Press
Hold for 3 seconds
Press twice
Press three times
---|---
Turning On
Press for 2 seconds to turn on the headphones. This is accompanied by an
audible notification and the blue LED lights up.
Pairing
1. To enter the pairing mode, hold the button for 4 seconds. This is
indicated by the LED alternately flashing red and blue.
2. On your device, turn Bluetooth on and locate and select LAMAX Muse2 in the
list of available Bluetooth devices. After successfully pairing, there is an
audible notification. If you have trouble pairing, remove your headphones from
the list of paired devices in your smartphone. Turn off the headphones and
then hold the button for 4 seconds. The headphones turn on and automatically
go into pairing mode. Pair the headphones again as in Step 2 above.
Turning Off
Press and hold them for 2 seconds to turn off the headphones.
Charging
To charge, connect the micro USB cable to the headphones and the other end to the 5V USB charger. The LED lights up red when charging and will turn off when fully charged.
Parameters
Wireless technology
Bluetooth range
Supported codecs
Battery capacity
Headphone charging time
Playback time
Weight| Bluetooth 5.0
up to 10 meters
SBC
500 mAh
3 hours
up to 35 hours
222 g
---|---
Subject to printing errors.
The latest version of the user guide can be
downloaded here:
https://www.lamax-electronics.com/downloads/lamaxmuse2/manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>