Nordtronic Box Relay Zigbee Installation Guide

June 6, 2024
Nordtronic

Box Relay Zigbee

Installation instructions

Nordtronic Box Relay Zigbee - Installation Instruction

Nordtronic Box Relay Zigbee - Monteringsvejledning Monteringsanvisning
2

Input voltage Output voltage Output current
100-240VAC 100-240VAC Max. 1.8mA

Compatible load types

Load symbol| Load type| Maximum load| Remarks
| LED lamps with
transformers| 200W @ 220V
100W @ 110V| Due to variety of LED lamp designs. maximum number of LED lamps is further dependent on power factor result when connected to switch
| LED drivers| 200W @ 220V
100W @ 110V| Maximum permitted number of drivers is 200W divided by driver nameplate power rating
| Incandescent lighting,
fighting, HV Halogen lamps| 400W @ 220V
200W @ 110V|
| Low voltage with electronic halogen lighting transformers| 200W @ 220V
100W @ 110V|

Operation

  1. Do wiring according to connection diagram correctly.

  2. This Zigbee device is a wireless receiver that communicates with a variety of Zigbee compatible systems. This receiver receives and is controlled by wireless radio signals from the compatible Zigbee system.

  3. Zigbee network pairing through coordinator or hub (Added to a Zigbee network)
    Step 1: Remove the device from previous Zigbee network if it has already been added to, otherwise pairing will fail. Please refer to the part “Reset factory settings manually”.
    Step 2: From your Zigbee controller or hub interface, choose to add lighting device and enter pairing mode as instructed by the controller.
    Nordtronic Box Relay Zigbee - Operation Step 3: power on the device, it will be set into network pairing mode (connected light flashes twice slowly), the network pairing mode will last until the device is added to a Zigbee network.
    Step 4:
    Connected light will blink 5 times and then stay solid on, then the device will appear in your controller’s menu as BoxRelayZ 98423051 and can be controlled through controller or hub interface.

  4. Reset factory settings manually
    Note:
    All configuration parameters will be reset after the device is reset or removed from the network.
    Nordtronic Box Relay Zigbee - Reset factory settings
manually

Step 2: Connected light will blink 3 times to indicate successful reset.

Wiring diagram
Nordtronic Box Relay Zigbee - Wiring diagram

Nordtronic Box Relay Zigbee - Ending Disposal

Nordtronic A/S | Flade Engvej 4 | DK – 9900 Frederikshavn | Denmark | CVR: 29808708 | Tel: +45 70209531 |www.nordtronic.com

Find the updated manual on our website – www.nordtronic.com With reservation for typing errors
98423051 02-2021

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals