Nordtronic SR-ZG2855-5C Wireless Switch Zigbee Instruction Manual

June 6, 2024
Nordtronic

Nordtronic SR-ZG2855-5C Wireless Switch Zigbee

ON/OFF button, click to turn ON/OFF all, press and hold down to search and pair to Zigbee network or factory reset the switch

Note: This remote supports 1 group for binding max. 30 lighting devices.

Quick Start

(Simplified operation compared to standard operations in the part “Operation”)

Network pairing mode: Click both buttons 3 times to set the remote into network pairing mode (the remote should not added to any network).

Operation

  1.  This Zigbee RGB+CCT remote is a wireless transmitter that communicates with a variety of Zigbee compatible systems. This transmitter sends wireless radio signals that are used to remotely control a compatible system.
  2. This Zigbee remote supports 1 group for binding max. 30 light-ing devices and enables to control both RGB and CCT Zigbee lighting devices.
  3. Touch link to a Zigbee lighting device.Nordtronic-SR-ZG2855-5C-Wireless-Switch-Zigbee-1
  4. Reset factory settings manuallyNordtronic-SR-ZG2855-5C-Wireless-Switch-Zigbee-2
  5. Remove a Touchlink paired Zigbee lighting deviceNordtronic-SR-ZG2855-5C-Wireless-Switch-Zigbee-3
  6. Factory reset a lighting device (Touch reset)Nordtronic-SR-ZG2855-5C-Wireless-Switch-Zigbee-4
  7. Find and bind a Zigbee lighting deviceNordtronic-SR-ZG2855-5C-Wireless-Switch-Zigbee-5 Note: Each remote can bind max. 30 lighting devices.
  8. Find and unbind a Zigbee lighting deviceNordtronic-SR-ZG2855-5C-Wireless-Switch-Zigbee-6
  9. Clear all find and bind mode paired lighting devicesNordtronic-SR-ZG2855-5C-Wireless-Switch-Zigbee-7
  10. Setup a network and add devices to the network (No coordinator or Hub Required)Nordtronic-SR-ZG2855-5C-Wireless-Switch-Zigbee-8
    • Step 6: Add more remotes to the network as you would like.
    • Step 7: Factory reset the lighting devices that you would like to add to the network, refer to their manuals.|
    • Step 8: Touchlink to pair the added remotes and lighting devices you would like to add, the devices will be added to the network through Touchlink, refer to their manuals.
  11. How to check whether the remote belongs to a network or not
    Short press any button, indicator blinking means the remote has already been added to a network. No blinking of indicator means the remote does not belong to any network.

Battery power monitor function

The remote will report battery power value to the coordinator under following situations:

  • When powered on.
  • When short pressing down both brightness button and RGB button simultaneously.
  • When operating the switch to send data packets (over 4 hours since last operation).
  • When added to the network by a coordinator.

Nordtronic A/S | Flade Engvej 4 | DK – 9900 Frederikshavn | Denmark | CVR: 29808708 | Tel: +45 70209531 | www.nordtronic.com

Find the updated manual on our website – www.nordtronic.com With reservation for typing errors

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals