SHINING 3D EinScan Pro HD Multifunctional Handheld 3D Scanner User Guide

: June 6, 2024
: SHINING 3D

Table of Contents

Preparation
- Device List
Installation
- Hardware Installation
Software Installation
Calibration
Fixed Scan
Handheld HD Scan
Handheld Rapid Scan
Scanning Tips
Summary
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SHINING 3D EinScan Pro HD Multifunctional Handheld 3D Scanner User Guide

Preparation

Device List

Standard Pack

Scanner body
Power adapter
Power cable
Calibration board
Calibration board support
Markers
USB drive Software installer (EXScan Pro, Solid Edge, user manual)
Markers remover /Module port cap lifter
Phone screen mount
Cable clip

Note:

Plug in dongle before opening Solid Edge software
Find the use of phone screen mount in Support-Help at www.einscan.com

Industrial Pack (optional)

Turntable
Tripod
Scanner tray
USB cable
Power adapter
Power cable

Color Pack (optional)

Texture camera

*Please only use water to clean the calibration board, avoid touching any corrosive liquid.

Recommended

Graphics Card

|

NVIDIA GTX1080 and higher

---|---

Video Memory

| >4G
Processor|

I7-8700

Memory

| 64G
Interface|

high-speed USB 3.0

Required

Graphics Card

| Quadro card P1000 and higher or NVIDIA GTX660 and higher
---|---
Processor|

Intel (R) xeon E3-1230, Intel (R) I5-3470, Intel (R) I7-3770

Memory

| 8G
Interface|

high-speed USB 3.0

Installation

Hardware Installation

Standard Pack

STEP 01: Turn on the device and connect it to the computer through USB 3.0 port.

Industrial Pack

STEP 01: Fasten the scanner tray onto the tripod and place the scanner on the tray.
STEP 02: Plug the USB cable into the USB port of the turntable and connect it to the computer. Connect the power cable to the turntable.

Color Pack

STEP 01: Hold the device upright and remove the USB port cover. The cover is located near the logo on the right side of the device.
STEP 02: Insert the Color Pack and lock it with a rotary lever.

Operation Environment

Avoid direct sunlight or too bright of light indoors.
Make sure the scanned object and table are stable. （For Fixed Scan）

Software Installation

Software Download

Download the software and user manual from www.einscan.com/support/download/

Run the installer

STEP 01: Double click software installation icon to install the software.

License Activation

STEP 02: After successful installation, when the device is correctly connected, double-click to open the software and activate the device. The format of activation is “online activation”. Make sure your computer is connected to the Internet.
(Online Activation)

Or do local activation and find the license in the USB drive.

(Local Activation)

Attention: If you install another device of different serial number, the software will automatically notify users to activate this device.

Online Activation
Local Activation

Calibration

Camera Calibration

Follow the instruction on the software to place the calibration board in 5 different positions.
Hold the scanner vertically and cover the screen range.

**STEP 01

**

**STEP 02

**

**STEP 03

**

**STEP 04

**

**STEP 05

**

White Balance Calibration

Only required for Color Pack

Hold the scanner vertically to the back side of calibration board (white) and adjust the distance until you find the proper distance.

The first time installing the software , calibration is required by default.

Calibration is also required for the following:

Device Change
After device enduring bumpy transportation
After device accuracy decreases
Device being uncalibrated for a long time, for example, 15 days.
When using the Color Pack, the texture camera’s position has been changed.

Fixed Scan

Handheld HD Scan

Handheld Rapid Scan

Scanning Tips

Scan Mode Selection

Use Handheld Rapid Scan mode when:

A fast scanning experience is needed;
Objects with good geometry for feature alignment;
Objects are hard to move or too big to stay on turntable for scanning.

Use Handheld HD Scan mode when:

High accuracy and high resolution by handheld scanning is required;
Objects are hard to move or too big to stay on turntable for scanning.

Use Fixed Scan with Turntable mode when:

High accuracy and high resolution is required;
Objects’ footprint within 150mm which may not cover most coded targets on turntable;
Weight under 5kg;
Objects’ footprint above 150mm with rich geometry features can also work in Fixed Scan with Turntable mode through feature alignment.

Use Fixed Scan without Turntable mode when:

High accuracy and high resolution is required;
Objects is too big or heavy to work on turntable.

Summary

Mode| Accuracy （mm）| Scan Efficiency| Resolution Point distance （mm）| Align Mode
---|---|---|---|---
Fixed Scan
with Turntable| Single Shot Accuracy 0.04
| Single Scan < 0.5s
| 0.24
| Turntable Coded Targets, Feature, Markers, Manual
Fixed Scan
without Turntable| Single Shot Accuracy 0.04
| Single Scan < 0.5s
| 0.24
| Feature, Markers, Manual
Handheld HD Scan| Up to 0.045
+0.3 mm/m (markers alignment)
| 10 fps 3,000,000 points/s
| 0.2-3
| Markers, Feature (with rich geometrical features on the surface), Hybrid(Markers and Feature)
Handheld Rapid Scan| Up to 0.1
+0.3 mm/m (markers alignment)
| 30 fps 1,500,000 points/s
| 0.25-3
| Markers, Feature (with rich geometrical features on the surface), Hybrid(Markers and Feature) Texture (with rich texture)

Difficult to Scan

Transparent objects like glasses
Shining or highly reflective objects like mirrors

Solution

Spray with white powder

Not Recommended

Moving objects or vibrating objects
Lattice structure with many small deep holes
Hairy objects like human hair and fur

Customer Support

Technical Support

Register at support.shining3d.com for support
Or contact through:
Email: einscan_support@shining3d.com
Skype: einscan_support

APAC Headquarters
SHINING 3D Tech. Co., Ltd. Hangzhou, China
P: +86-571-82999050
Email: sales@shining3d.com
No. 1398, Xiangbin Road, Wenyan,
Xiaoshan,Hangzhou, Zhejiang, China, 311258

EMEA Region
SHINING 3D Technology GmbH. Stuttgart, Germany
P: +49-711-28444089
Email: sales@shining3d.com
Breitwiesenstraße 28, 70565, Stuttgart, Germany

Americas Region
SHINING 3D Technology Inc. San Francisco, United States
P: +1415-259-4787
Email: sales@shining3d.com
1740 César Chávez St. Unit D. San Francisco, CA 94124