REVO Victory 350XG Gaming Headset User Guide

Victory 350XG Gaming Headset

Product Information

Specifications:

• Product Name: REVO Cushion & Cable Replacement Guide
• Model: REVO
• Compatibility: Headphones with ear cushions and detachable
  cables

Product Usage Instructions

Cushion Replacement:

1. Locate Stealth Release™ Tabs: Find the tabs at
   3 and 9 o’clock, depress each one, and lift towards you to
   disengage.

2. Remove Cushions: Take off the ear cushions
   from the ear cups of the headphone.

3. Locate New Cushions: Ensure the new ear
   cushion is positioned correctly.

4. Reinstall Cushions: Apply pressure to both
   tabs at 3 and 9 o’clock until the cushion snaps into place.

Cable Replacement:

1. Locate Stealth Release™ Tabs: Find the tabs at
   3 and 9 o’clock, depress each one, and lift towards you to
   disengage.

2. Remove Cushion: Take off the left ear cushion
   from the ear cup of the headphone.

3. Locate Pin or Locking Screw: Identify the pin
   or screw on the left ear cup. Disengage it using a pry tool or
   screwdriver.

4. Remove Cable: Pull the cable straight from the
   bottom.

5. Reinstall Cable: Replace with a new cable and
   ensure it is properly engaged.

6. Reinstall Pin or Locking Screw: Securely put
   back the pin or screw that was removed during disassembly.

7. Reinstall Cushion: After replacing the cable,
   snap the ear cushion back into place by applying pressure to the
   tabs at 3 and 9 o’clock.

Frequently Asked Questions (FAQ)

Q: Can I use third-party cables for replacement?

A: It is recommended to use cables specifically designed for
your headphone model to ensure proper compatibility and
performance.

Q: How often should I replace the cushions?

A: Cushions should be replaced when they show signs of wear or
deterioration to maintain comfort and sound quality.

CUSHION & CABLE
Replacement Guide
REVO

CUSHION REPLACEMENT

STEP 1 – Locate Stealth ReleaseTM Tabs
Locate the Stealth ReleaseTM tabs at 3 and 9 o’clock. Depress each one at a time and lift toward you. Note: each clip will have to be disengaged.
3

STEP 2 – Remove Cushions
Remove the ear cushions from the ear cups of the headphone
4

STEP 3 – Locate New Cushions
Locate the new ear cushion and make sure it is right side up
5

STEP 4 – Reinstall Cushions
Apply pressure to both the tabs at 3 and 9 o’clock. The ear cushion will snap into place.
6

CABLE REPLACEMENT

STEP 1 – Locate Stealth ReleaseTM Tabs
Locate the Stealth ReleaseTM tabs at 3 and 9 o’clock. Depress each one at a time and lift toward you. Note: each clip will have to be disengaged.
8

STEP 2 – Remove Cushions
Remove left ear cushion from the ear cup of the headphone
9

STEP 3 – Locate Pin or Locking Screw
Locate the removable pin or screw on the left ear cup (screw or locking pin depends on model). Using the supplied pry tool or a small standard screw driver, disengage the pin.
10

STEP 4 – Remove Cable
Pull the cable straight from the bottom.
11

STEP 5 – Reinstall Cable
Replace with a new cable. Be sure the cable is engaged.
12

STEP 6 – Reinstall Pin or Locking Screw
Replace with a new cable. Be sure the cable is engaged.
13

STEP7 – Reinstall Cushion
Locate ear cushion and make sure it is right side up. Apply pressure to both the tabs at 3 and 9 o’clock. The ear cushion will snap back into place
14

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>