veho VCC-005-HDPRO3 Muvi HD Pro 3 Titan Bodyworn Handsfree Camcorder User Manual

June 6, 2024
veho

veho VCC-005-HDPRO3 Muvi HD Pro 3 Titan Bodyworn Handsfree Camcorder User Manual
veho VCC-005-HDPRO3 Muvi HD Pro 3 Titan Bodyworn Handsfree
Camcorder

What’s in the box?

  • Muvi HD Pro 3 Titan Camera
  • Mini USB Data Cable
  • Clip Mount
  • Software CD

Guide to controls

Product Overview
Product Overview

  1.  Wide angle camera lens
  2. Record button
  3. Infrared light
  4. Infrared sensor
  5. Microphone
  6. Multi-functional button
  7. On/Off switch
  8. USB port
  9. External camera port
  10. Speaker
  11. LED display screen
  12. Charging LED
  13. Camera status LED
  14. Docking port

Guide to LED screen icons

LED screen icons Overview

  1. Battery level indicator
  2. Time
  3. Day (Monday – Sunday)
  4. Remaining storage space
  5. Mute
  6. External device detected
  7. Recording

Charging

Charging Instructions

We suggest fully charging the Muvi HD Pro 3 before its first use.

Connect the camera using the supplied USB cable and plug it into a compatible power source. When charging, the charging LED will turn red. Once fully charged, the charging LED will turn green.

Using the camera

Power on/power off

To turn the camera on, slide the power switch into the ‘ON’ position.
The status LED will appear green whilst the camera is switched on.

To turn the camera off, slide the power switch into the ‘OFF’ position. The camera status LED will disappear. If audio tones have been enabled through camera software, you will be notified.

Video recording

Video recording

First ensure the HD Pro 3 has been switched on, click the record button to begin recording. The status LED will change from green to flashing red whilst recording.
If audio tones have been enabled through camera software, you will be notified.

To stop video recording, click the record button once more. The status LED will change from flashing red to green when the recording ends. If audio tones have been enabled through camera software, you will be notified.

Multi-functional button

Click the multi-functional button once to manually switch off the camera LCD screen.

Double click the multi-functional button to mute/ unmute the camera microphone. The current microphone status is shown on the LCD screen.

Press and hold the multi-functional button for approximately 3 seconds to switch off the camera status LED’s. The camera will still function as required in this mode, but the user will not be notified; please ensure the camera is in the desired mode before activating this feature.

Camera Multi-functional button
Camera Multi-functional button

Camera settings

Downloading camera software

Insert the included software disk into the CD drive on your PC. Alternatively, the software can be found on our download centre at https://veho- world.com/downloads/
Please read and follow the on screen set up information.

Camera settings

Camera settings

To update camera settings, open the camera software, ensure the camera is switched off, and plug the camera into your PC using the provided USB cable. If the software does not open, please right- click, and select ‘Run as administrator’.
Enter the default password ‘123456’ and change the operation option to ‘Parameter Settings’, click ‘Apply’ to access camera settings. The camera password can be updated in settings, please ensure to use 6 or more characters.

Downloading footage

To download footage from the camera, open the camera software, ensure the HD Pro 3 is switched off, and plug the camera into your PC using the provided USB cable. If the software does not open, please right-click, and select ‘Run as administrator’.
Enter the camera password and change the operation option to ‘Removable Disk’, click ‘Apply’ and the footage should open into a folder on your PC.

Importing data

To import data from the camera, open the camera software, ensure the HD Pro 3 is switched off, and plug the camera into your PC using the provided USB cable. If the software does not open, please right-click, and select ‘Run as administrator’.
Enter the password and change the operation option to ‘Import Data’, click ‘Apply’ and the user will be able to view camera data.

Specifications

Resolution 1080P@30FPS / 720P@30 FPS / 480P@30FPS
Video format MP4
Lens 120 horizontal wide angle
Sensor 2M CMOS
Storage 64GB
Battery size 3600mAh
Battery life 15 hours at 1080p
Standby time Up to 300 hours
IP rating IP67
Camera weight 156g
Camera dimensions 91mm x 60mm x 28mm (3.5” x 2.3” x 1.1”)
Video compression H.264
Screen 0.96’ TFT colour screen, 80 x 160 resolution

Tips & troubleshooting

  • To maintain lithium battery performance, please ensure to use and charge the camera at least once every three months.
  • It is normal for the camera’s temperature to rise slightly during continuous use.
  • Avoid dropping or heavy impact on the camera, this could damage internal and external components.
  • Keep the camera away from objects generating intense magnetic fields, it may damage the camera or files on the camera.
  • Do not place the camera in direct sunlight and avoid high temperatures where possible.
  • Store the camera in a cool, dry, and dustproof environment.

Disclaimer: Please ensure only to use cable and plug provided with the camera, failing to do so may void your product warranty. Veho is not responsible for ensuring all footage is captured correctly. Please ensure you are familiar with operating the Muvi HD Pro 3 before using it in a live environment, also ensure you maintain and store the camera correctly.

Support

In the event, you need to contact Veho for support or troubleshooting for your Muvi TITAN Bodyworn Camera, please contact us via our chat box on our website at:
veho-world.com

Other Veho products

  • M-Series M1 Wireless Speaker
    Available in grey, orange, blue & red
    M1 Wireless Speaker

  • Pebble PZ10 Pro 10,000mAh Power Bank
    VPP-013-PZ10-B
    Pebble PZ10 Pro 10,000mAh Power Bank

  • STIX True Wireless Earphones
    VEP-115-STIX-W
    STIX True Wireless Earphones

  • Cave Smart Home Starter Kit
    VHS-001-SK
    Cave Smart Home Starter Kit

EC DECLARATION OF CONFORMITY

Hereby, Veho UK LTD declares that the radio equipment type (VCC-005-HD Pro 3) is in compliance with EU Directives.
The full text of the EU Declaration of Conformity is available at
https://veho-world.com/compliance/

 Icons

This symbol, affixed to the product or its packaging, indicates that the product must not be processed as household waste. This product should be correctly disposed of according to your local guidelines for electrical and battery operated products. Correct disposal of the battery will avoid potential harm to the environment and human health. For further information regarding the recycling of this product, please contact your local waste recycling centre.

veho Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals