AUDAC ANM88 Networked Audio Module Instruction Manual
- June 13, 2024
- AUDAC
Table of Contents
AUDAC ANM88 Networked Audio Module
Updating the system
This manual is put together with much care, and is as complete as could be on the publication date. However, updates on the specifications, functionality or software may have occurred since publication. To obtain the latest version of both manual and software, please visit the Audac website@audac.eu
Introduction
Dante™/AES67 networked audio module with 8×8 license for LUNA-U
The ANM88 is a hardware extension card that makes a LUNA-U audio matrix processor a Dante™/AES67 enabled device. It comes with 8×8 Dante™/AES67 channels and can be expanded with additional software extension SL-NAC8 for additional networked audio channels. The LUNA-U is limited to a maximum of 32×32 channels.
Precautions
READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY
ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY
ALWAYS HANDLE THIS UNIT WITH CARE
HEED ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP OF THIS DEVICE
NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED ON THE APPARATUS
DO NOT PLACE THIS UNIT IN AN ENCLOSED ENVIRONMENT SUCH AS A BOOKSHELF OR CLOSET. ENSURE THERE IS
ADEQUATE VENTILATION TO COOL THE UNIT. DO NOT BLOCK THE VENTILATION OPENINGS.
DO NOT STICK ANY OBJECTS THROUGH THE VENTILATION OPENINGS.
DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR OTHER APPARATUS THAT PRODUCE HEAT
DO NOT PLACE THIS UNIT IN ENVIRONMENTS WHICH CONTAIN HIGH LEVELS OF DUST, HEAT, MOISTURE OR VIBRATION
THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS
PLACE THE UNIT ON A STABLE BASE OR MOUNT IT IN A STABLE RACK
ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER
USE THE APPARATUS ONLY IN MODERATE CLIMATES
CAUTION – SERVICING
This product contains no user serviceable parts. Refer all servicing to
qualified service personnel. Do not perform any servicing (unless you are
qualified to)
EC DECLARATION OF CONFORMITY
This product conforms to all the essential requirements and further relevant
specifications described in following directives: 2014/30/EU (EMC) &
2014/35/EU (LVD).
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
The WEEE marking indicates that this product should not be disposed with
regular household waste at the end of its life cycle. This regulation is
created to prevent any possible harm to the environment or human health.
This product is developed and manufactured with high quality materials and
components which can be recycled and/or reused. Please dispose this product at
your local collection point or recycling centre for electrical and electronic
waste. This will make sure that it will be recycled in an environmentally
friendly manner, and will help to protect the environment in which we all
live.
Network settings
STANDARD NETWORK SETTINGS
DHCP: ON
IP Address: Depending on DHCP
Subnet Mask: 255.255.255.0 (Depending on DHCP)
Gateway: 192.168.0.253 (Depending on DHCP)
DNS 1: 8.8.4.4 (Depending on DHCP)
DNS 2: 8.8.8.8 (Depending on DHCP)
CAUTION
Before installing the Dante Brooklyn 3 module to LUNA-U, make sure the power
is switched off and the power cord is disconnected. Malfunctions or electrical
shocks may occur otherwise.
Step 1:
Make sure that the slot whereto the module should be installed is open and
ready for installation. The corresponding slot can be reached by releasing the
four screws on the cover panel located on top of the LUNA-U.
Step 2:
Before removing the module from its protective box, we recommend touching a
grounded metal chassis (or any other grounded point) and during the
installation wearing a grounded EAS wristband to prevent electrostatic
discharges affecting the sensitive electronic components. It is recommended to
always hold the module card by the metal connection panel and avoid touching
the components on the circuit board directly.
Step 3:
Align both edges of the module with the slot and carefully insert the module
into the slot. It should slide into the slot without any considerable
resistance when well positioned into the guide rail.
Step 4:
Fasten the cover panel using the four screws. Once the module is installed
into the slot correctly, the system can be powered-on and the module
functionality will be automatically discovered.
Updating the system
The update section on the front overview screen shows the running version of the device and the updates which are available. Thanks to the OTA feature of the LUNA series, the device automatically checks the latest version whenever the device is on the network. On this screen, the device can be updated to available software by holding the rotary function dial for 5 seconds.
Technical specifications
Dante Brooklyn 3 Module
Network audio I/O| 8×8 Dante™/AES67 I/O Channels (Up to 32×32 Channels with
SL-NAC8)
Audio Transport Formats| Dante Audio over IP, AES67 RTP, SMPTE ST2110-30 RTP
(enrolled devices)
Sample Bit Depth| 16, 24 or 32 bits per sample
Audio Buffering| Up to 2000 samples per channel
Clocking| Onboard word clock or external word clock
Dimensions (W x D)| 45 x 60 mm
Power| 3.3VDC @ 2W max
Physical Connector| Mini-PCI
Compatible device| LUNA-U
Customers Support
Discover more on audac.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>