veho VEP-024-ZB7-B Wireless Headphone User Manual

veho VEP-024-ZB7-B Wireless Headphone

Product Information

The Veho ZB-7 headphones are a wireless headphones with active noise cancelling feature. The headphones come with a USB-C charging port and a 2.5mm audio port for line-in connection. The headphones
have a battery life of up to 32 hours and can be charged in approximately 72 minutes. The headphones also have call functions such as answering, ending, and rejecting calls, call mute/unmute, call switch, and number redial. The product comes with a user manual and line-in cable.

Product Usage

Charging: To charge the headphones, connect the supplied USB-C cable to the headphones and then into a compatible 5V1A power source. The status LED will show solid red when charging, turning blue when fully charged. When the battery is low, a warning tone will sound every 3 minutes.

Pairing: To pair the headphones with a device, turn on the Bluetooth on your device and search for “Veho ZB-7”. Once the device is found, select it to complete the pairing process.

Line-In Connection: To use the line-in connection, connect the supplied 2.5mm audio cable from the headphone audio port to your device. The headphones will default to line-in mode whilst the audio cable is connected.

Functions: The headphones have various call functions that can be accessed by pressing the power button, volume buttons, and holding buttons for a specific amount of time. These functions include answering/ending calls, rejecting calls, call mute/unmute, call switch, and number redial.

Reset: To reset the headphones, ensure that the headphones are disconnected from devices. Simultaneously press and hold the power and volume – buttons for 5 seconds.

Specifications

• Bluetooth Version: V5.0
• Driver Size: 40mm
• Speaker Sensitivity: 32 dB
• Impedance: 32
• Frequency Response: 20Hz-20KHz
• Battery Size: 500mAh
• Charging Time: Approximately 72 minutes
• Play Time: Up to 32 hours
• Charging Port Type: USB-C
• Wireless Range: Up to 10 meters
• Dimensions: 164.2mm x 190.6mm x 89.1mm
• Weight: 230g

Support

If you need support or troubleshooting for your Veho ZB-7 Headphones, please contact us via our chat box on our website at veho-world.com.

Guide to the headphones

1. Power button
2. Power status LED
3. Microphone
4. 2.5mm audio port
5. Active noise cancelling
6. Active noise cancelling LED
7. Volume + / Next track
8. Volume – / Previous track
9. USB-C charging port
10. Charging status LED

Charging

Charging the headphones Connect the supplied USB-C cable to the headphones and then into a compatible 5V⎓1A power source. The status LED will show solid red when charging, turning blue when fully charged. When the battery is low, a warning tone will sound every 3 minutes.

Pairing

Pairing with a device Ensure the headphones are off. Press and hold the power button for 5 seconds, and wait until a ‘Pairing’ tone sounds and the power status LED flashes red/blue. Select ‘Veho ZB-7’ from the Bluetooth® menu on your device.

Line-in cable

Using the Line-in cable Connect the supplied 2.5mm audio cable from the headphone audio port to your device. The headphones will default to line-in mode whilst the audio cable is connected.

Functions

• Power on/off Press and hold the power button for 3 seconds to turn on, the power status LED will flash blue. Press and hold the power button for another 3 seconds to turn off, the power status LED will flash red.
• Play/pause Press the power button once to play and once again to pause.
• Volume up/Next track Press the (+) button for 2 seconds to skip to the next track. Press once to increase the volume.
• Volume down/Previous track Press and hold the (-) button for 2 seconds to skip to the previous track. Press once to reduce the volume.
• Voice assistant Simultaneously press and hold the volume + and volume – buttons for 2 seconds.
• Active Noise Cancelling (ANC) Press the ANC button once to change modes between on/off/ambient mode. Active Noise Cancellation uses the microphone and speakers to reduce background and surrounding noises.
• Bass control Press and hold the ANC button for 2 seconds to change modes between bass up/normal.
• Multipoint connection Pair the headphones to a Bluetooth® device, disable Bluetooth® on this device and repeat pairing instructions with a second device. Multipoint connection allows the headphones to maintain simultaneous connections with two source devices.
• Reset Ensure the headphones are disconnected from devices. Simultaneously press and hold the power and volume – buttons for 5 seconds.
• Answering/ending calls Press the power button once to answer an incoming call. Press once again to end the call.
• Rejecting calls Press and hold the power button for 2 seconds to reject an incoming call.
• Call mute/unmute Press and hold the volume + button for 3 seconds.
• Call switch Simultaneously press and hold the volume + and volume – buttons for 2 seconds during a call to switch between the headphones and mobile device.
• Number redial Double click the power button to redial the most recent contact on your call log.

Specifications

• Bluetooth® version V5.0
• Driver size 40mm
• Speaker sensitivity 117 ±3dB
• Impedance 32Ω
• Frequency response 20Hz–20KHz
• ANC reduction 32 dB
• Input voltage 5V⎓1A
• Battery size 500mAh
• Charge time Approx. 72 minutes
• Play time Up to 32 hours
• Charging port type USB-C
• Wireless range Up to 10 meters
• Dimensions 164.2mm x 190.6mm x 89.1mm
• Weight 230g

Support

Should you need to contact Veho for support or troubleshooting for your ZB-7 Headphones, please contact us via our chat box on our website at: veho- world.com

Other Veho products

1. Pebble PZ-12 Rugged Portable Power Bank – 10,000mAh
2. M-Series MZ-S Wireless Speaker / Black, White, Orange, Blue
3. UW-29 Ultra-wide flat slim bezel 29″ pro display / VHM-001-29UW

DECLARATION OF CONFORMITY

Hereby, Veho UK LTD declares that the radio equipment type (VEP-024-ZB7-B) is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at
https://veho-world.com/compliance/

• Frequency band(s) – 20Hz-20KHz
• Maximum radio-frequency power – ≤10dBm

Disposel

This symbol, affixed to the product or its packaging, indicates that the product must not be processed as household waste. This product should be correctly disposed of according to your local guidelines for electrical and battery operated products. Correct disposal of the battery will avoid potential harm to the environment and human health. For further information regarding the recycling of this product, please contact your local waste recycling centre.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by VEHO GLOBAL GROUP LIMITED is under license. Other trademarks and trade names are those of their respective owners.

References

• Veho
• Compliance | veho

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>