veho muvi HD PRO3 Titan Bodyworn Camcorder Instructions
- June 6, 2024
- veho
Table of Contents
Titan muvi HD PRO3 Titan Bodyworn Camcorder
Firmware Update Instructions
Firmware Installation
- Run the Muvi HD Pro 3 software and then connect the camera to your PC (ensure the camera is switched off)
- Enter your six-digit password, select the
Removable Disk’ option, and click
Apply’ - . Drag and drop the `SD_CarDV.bin’ file into the opened USB Drive folder
- Disconnect the HD Pro 3 from your PC, allowing the camera to shut down. Plug the camera back into your PC, the `Update Firmware’ screen will appear. The unit will shut down once updated Update Firmware
Camera ID Update
-
Download and run the `HDA Device ID Tool’ software. Please note, you must ensure the Muvi HD Pro 3 software has been closed for this to operate
-
Connect the camera to your PC as prompted
-
Insert your device ID into the text box and click `Configure’
-
Enter your camera password then click `OK’, you should see a configuration success prompt
-
Disconnect the camera and close down the software
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>